Hi Guys

Anyone know how to program the P1 alarm so that it auto sets and locks doors after 30s, It does say it can be done in the book but tio get the main dealer to do it, just wondering if anyone knows on here how to do it?

save me having to take a trip to the dealership

The sigma M30 fitted on my MY00 Turbo will reset itself after 30 seconds if you turn off the alarm but don't open any doors. This is just in case you press the button and it unlocks and you don't realise.

Si

Hi GSM21,

I can email you a copy of Sigma M30 programming manual if you like?

Cheers,

Rob

There are three different features:

-Auto re-arm, which works as described above. Only locks the doors if you've unlocked them but not got in for a pre-programmed time.
This is normally activated by Subaru before selling the car.

-Auto arm, which sets the alarm after a pre-programmed time from the ignition being turned off and the last door being closed.

-Auto arm with door locking, which is as auto arm but also locks the doors. This mode is a bit dangerous in that if you get out and leave your keys in the car they'll get locked in.

The user's manual says these features need to be programmed by a dealer but the e-mail copy of the programmers manual that is circulating lets you know what codes to enter to switch on/off these features.

Hi Guys

Thx for the replys

could someone please e-mail copy of the programmers manual that is circulating lets you know what codes to enter to switch on/off these features.

Then i can programme the settings for auto arm myself

GSM21,

Copy of the programmers manual on it's way......

Check your email.

Regards,

Rob

Rob you could send that my way as well.

Thanks

Pete

rob any chance of a copy of manual as well thks

rob could u send me a copy as well pls..thks

any chance of someone passing this on to me please

( bloody chain letters! )

thanks in advance

pete

Rob, could you email me a copy of the M30 manual as well.

Many Thanks,

Ian.

And me please !

Thanks

Steve.

If you don't get a copy of the manual see here ...

http://www.scoobynet.co.uk/bbs/thread.asp?threadid=34449&Page=1

Dave :)

Could you mail me a copy

thanks

Neil

Rob,
And me please.......

Perhaps you could post the thing on this website somewhere ?