Do you need tools to fit a panel filter
#5
OK so what's the best one to buy? I wanna purchase it this afternoon yah
Looked at STI ones, JR ones and also heard lots abat the elusive "green cotton" ones. Where te fack can you buy the latter?
Looked at STI ones, JR ones and also heard lots abat the elusive "green cotton" ones. Where te fack can you buy the latter?
#6
Scooby Regular
Join Date: Nov 2005
Location: manchester
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
1) 12mm socket and extention bars
2) cordless drill
take 2 12mm bolts off at bottom of airbox....before you undo the 2nd bolt closer to the window screen take off the maf hose...you will then be able to get to the second 12mm bolt, lift the airbox out by pulling it away from the wing as the cold air feed is attached...now undo the screws with the cordless and replace with new filter and out back together...5 min max.
Bob
2) cordless drill
take 2 12mm bolts off at bottom of airbox....before you undo the 2nd bolt closer to the window screen take off the maf hose...you will then be able to get to the second 12mm bolt, lift the airbox out by pulling it away from the wing as the cold air feed is attached...now undo the screws with the cordless and replace with new filter and out back together...5 min max.
Bob
Trending Topics
#9
Scooby Regular
Join Date: Nov 2005
Location: manchester
Posts: 854
Likes: 0
Received 0 Likes
on
0 Posts
honnest m8 its a **** easy job, open bonnet and look at the airbox (big plastic thing)....you will see a connection on the maf sensor...take this off and then undo the 12mm bolts underneath the box its self....you will see the first 12mm towards the front of the car...the second one is hidden underneath the hose which is connected to the maf....take this hose off and then you will see the second 12mm bolt.....undo this and the box will pull off, replace filter and put back together.
#14
Scooby Regular
iTrader: (3)
Join Date: Jun 2005
Location: Surrounded by sheep, tidy.
Posts: 3,294
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pars
Hay
Do you need tools to fit a panel filter (1995 WRX)
Is it easy
Why didn't Steve McQueen make it over the fence
Do you need tools to fit a panel filter (1995 WRX)
Is it easy
Why didn't Steve McQueen make it over the fence
Steve McQueen didn't make it over the fence because his velocity and launch angle calculations were all wrong. I believe he also seriously underestimated the kerb weight of his 1961 Triumph TR6 Trophy.
Rich.
#16
Scooby Regular
iTrader: (3)
Join Date: Jun 2005
Location: Surrounded by sheep, tidy.
Posts: 3,294
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Pars
Every time I watch that film - one of my absolute faves - I sooooooo want it to be different
Re the 10 and 12mm stuff... I poss have these tools
Re the 10 and 12mm stuff... I poss have these tools
#18
Scooby Regular
Join Date: Jan 2006
Location: st helens
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
he would have had a far better chance of escape if he had hung on a little longer for a german with a hayabusa or maybe gsxr-1000.this would have given him a lot better chance of clearing the said obstacle but he may have been edging his bets waiting for another 40 or so years for these bikes to become available.
on saying that he would not have needed to make the jump then because the war would have been won and he could have merrily skipped across the border ,whilst whistling his favourite girls aloud track.
on saying that he would not have needed to make the jump then because the war would have been won and he could have merrily skipped across the border ,whilst whistling his favourite girls aloud track.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
Bazil_SW
Engine Management and ECU Remapping
24
21 September 2015 11:55 PM
aaron_ions
General Technical
1
17 September 2015 10:42 AM