Oil Catch Can
#6
Scooby Regular
Join Date: Jun 2002
Location: Nottingham
Posts: 5,285
Likes: 0
Received 0 Likes
on
0 Posts
its more running fresh pipes from the manifold and installing some decent guage stuff to reach all the way down to the can by the front of the battery on my car
bear in mind I think steven felt compelled to do some tidying of my wiring also
bear in mind I think steven felt compelled to do some tidying of my wiring also
Trending Topics
#9
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Jesus Christ. Seriously guys, if you cant follow the instuctions i put on the other thread, then you do really need someone to install it for you. I would be surprised if a dealer would do it, well in a tidy fasion anyway.
Do you know where the rockers covers are?
If you do, can you see a black plastic part on the top of the covers with a 1/2 inch pipe sticking up from them. They are roughly positioned over pistons 3 and 4.
Stood at front of car pistons are as follows.
3 4
1 2
Hopefully you will now be able to identify these 2 cam breather pipes.
Now you have found them, follow them with your hand and eyes as far as you can, either under or over the inlet manifold, they will ultimately join together and return to the inlet pipe.
Then follow the rest of the instructions i posted in General Tech.
Steven
Do you know where the rockers covers are?
If you do, can you see a black plastic part on the top of the covers with a 1/2 inch pipe sticking up from them. They are roughly positioned over pistons 3 and 4.
Stood at front of car pistons are as follows.
3 4
1 2
Hopefully you will now be able to identify these 2 cam breather pipes.
Now you have found them, follow them with your hand and eyes as far as you can, either under or over the inlet manifold, they will ultimately join together and return to the inlet pipe.
Then follow the rest of the instructions i posted in General Tech.
Steven
#11
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
Harvey, they already have catch cans, recently bought in the Group buy i believe.
I posted quite detailed instructions in the general section on how to fit them, and like you am surprised they cant fit them themselves. Perhaps we are too competent/assume its too easy? and my apparant lack of patience above is unjustified.
?
I posted quite detailed instructions in the general section on how to fit them, and like you am surprised they cant fit them themselves. Perhaps we are too competent/assume its too easy? and my apparant lack of patience above is unjustified.
?
Thread
Thread Starter
Forum
Replies
Last Post