How much extra BHP?
#1
How much extra BHP?
Just for fun to give me a rough idea?
UK MY99 Turbo (Standard not PPP)
Blitz Nur Spec R Full System
Hayward & Scott Downpipe
STI Panel filter
UK MY99 Turbo (Standard not PPP)
Blitz Nur Spec R Full System
Hayward & Scott Downpipe
STI Panel filter
#2
Scooby Regular
Join Date: Oct 2002
Location: North Staffs. UK
Posts: 2,046
Likes: 0
Received 0 Likes
on
0 Posts
#3
Scooby Regular
Join Date: Dec 2003
Location: Farnborough, Hants
Posts: 917
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by markwild
#4
Cheers guys, some good info on there.
WRXPete, you could well be right with that figure going by the Dyno lists.
Someone at work who heard I got it done said 5-10bhp.
WRXPete, you could well be right with that figure going by the Dyno lists.
Someone at work who heard I got it done said 5-10bhp.
#5
theres a chap on there that got 246bhp for having, ScoobySport back box, ITG air filter plus ScoobySport downpipe and mid-section (no cats) on my00
Now for arguements sake I have a my99 with green filter, H & S, downpipe, midsection and back box - no cats, would my results be showing similar?
obviously there are other factors, weather, petrol etc and you cant get an exact comparison unless you use the same rr, just curious really, thought that was a little high for the mods that I have added.
Now for arguements sake I have a my99 with green filter, H & S, downpipe, midsection and back box - no cats, would my results be showing similar?
obviously there are other factors, weather, petrol etc and you cant get an exact comparison unless you use the same rr, just curious really, thought that was a little high for the mods that I have added.
#6
Scooby Regular
Join Date: Oct 2002
Location: North Staffs. UK
Posts: 2,046
Likes: 0
Received 0 Likes
on
0 Posts
I wouldn't be surprised at these figures, though it various quite a bit between R/Rs.
When I was running my TD04, I had 281bhp from K+N panel, samco hoses (I/C), I/C tilt kit, full TSL De-cat (inc Grp A Downpipe) and PE Remap to 1.2 bar.
This was on a my98 UK.
Hope that helps,
Mark
When I was running my TD04, I had 281bhp from K+N panel, samco hoses (I/C), I/C tilt kit, full TSL De-cat (inc Grp A Downpipe) and PE Remap to 1.2 bar.
This was on a my98 UK.
Hope that helps,
Mark
Thread
Thread Starter
Forum
Replies
Last Post