Tentenths

This has gradually been getting worse, to the point where there is now a permanent "tizzing" noise.

It appears to be coming from the catch itself. If I press down on it slightly it stops, as it does if the lid is left open.

Presumably the answer is to remove and then refit the catch, or is there a quicker/easier fix?

Dan J

Try a little bit of blue tack around the latch! Cheapest and easiest fix I can think of!

wrxmania

Take the lid off completely and install a set of useful gauges?

rb5037

blue tack sounds like the cheaper option.

I'd go for that

IN THE STICKS

A couple of bits of rubber stuck between the lid and the dash cured mine


Dave

SiDHEaD

How much? Do they come with a pod?

Adam M

I had soem round foam self adhesive pads which came with some electrical equipment.

I stuck these along the edge exposed to the lid either side of the catch to push the lid away from the catch.

If you were very sensitive you could feel it makes it more difficult to close, but it fixed the rattling straight away.

Midlife......

iTrader: (2)

sidhead

gauges only.....

Shaun

carl

Eventually it will break off because the screw holders in the back of it are plastic. (Temporary) solution is to remove the whole tray, and reattach the lid using longer screws.