RS Twin turbo Boost controller ??
05 December 2003, 08:27 PM
#1
Scooby Newbie
Thread Starter
Join Date: Dec 2003
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Recently i bought this RS Twin Turbo with a JDM BLITZ DUAL SBC TURBO BOOST CONTROLLER on it and have no idea wot it should be set at and be running at? Can someone one help me?
The RS has had a lot of mods done to the motor like bigger cams and bored out ect?
Someone advise me plz
The RS has had a lot of mods done to the motor like bigger cams and bored out ect?
Someone advise me plz
05 December 2003, 10:10 PM
#2
Scooby Regular
Desmadre RS,
Logon to 'legacyb4' on yahoo groups.
Loadsa info on TT's, best chance for a response.
Factory boost cut is (I think) 1.2bar.
Don't push it, or your blow the primary/engine(depending on mods).
HTH
Mark
Logon to 'legacyb4' on yahoo groups.
Loadsa info on TT's, best chance for a response.
Factory boost cut is (I think) 1.2bar.
Don't push it, or your blow the primary/engine(depending on mods).
HTH
Mark
06 December 2003, 01:40 PM
#3
Scooby Regular
Join Date: Oct 2001
Posts: 1,260
Likes: 0
Received 0 Likes
on
0 Posts
That is good advice on the boost controller/loud pedal. Just upping the boost without extra fuel, esp. on UK juice, can be lethal very quickly (esp. if you don't have a knock detector). Be cautious till we know enough to give you sensible advice.
HTH
HTH
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM