How long will i have to wait for my STI8 ppp
#2
Former Sponsor
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
Deerhunter, as l understand it from my Subaru dealer, the problem is a shortage of ECU's for the remap. Prodrive have a limited number in their exchange programme and it's the delay receiving them fixing them and getting them back out that's causing the hold ups.
'Course that may be off the mark, but it's the story as being told by IM to my dealer.
Maybe a Prodrive person can say for sure, Halloooo!! anybody out there??
David APi Engines
'Course that may be off the mark, but it's the story as being told by IM to my dealer.
Maybe a Prodrive person can say for sure, Halloooo!! anybody out there??
David APi Engines
#4
I remember hearing that if you leave the car with your dealer for a few days they can take out your ECU, send it to Prodrive for remapping, and refit it. I would ask if they can do that and provide you with a courtesy car.
#5
Scooby Regular
Join Date: Jul 2000
Location: Solihull
Posts: 1,498
Likes: 0
Received 0 Likes
on
0 Posts
The components for the PPP are all stocked at Subaru and the ECUs are reprogrammed there as well. As far as I am aware, there is currently no delay in the parts being sent by Subaru, although you may have a wait at the dealers end as they may well be booked up in the workshop.
Get your dealer to chase the parts if they haven't arrived within about a week.
Mike
Get your dealer to chase the parts if they haven't arrived within about a week.
Mike
#6
Scooby Senior
iTrader: (8)
Join Date: Sep 2002
Location: www.m-soc.com
Posts: 3,684
Likes: 0
Received 0 Likes
on
0 Posts
I was told 2-3 weeks when I enquired yesterday and the workshop isn't that busy at the moment. Not in any rush though so happy with this.
While your on Mike, the spring kit (Available in 8 German weeks). Will it be OK with 18" wheels fitted with 225/40/18's ?? or will they rub. I ask this as these tyres are what came with the Prodrive wheels I had (P-FF7's) and were also on my previous UK300.
Don't want them to rub the arches ?
Thanks
Steve
While your on Mike, the spring kit (Available in 8 German weeks). Will it be OK with 18" wheels fitted with 225/40/18's ?? or will they rub. I ask this as these tyres are what came with the Prodrive wheels I had (P-FF7's) and were also on my previous UK300.
Don't want them to rub the arches ?
Thanks
Steve
#7
Scooby Regular
Join Date: Jul 2000
Location: Solihull
Posts: 1,498
Likes: 0
Received 0 Likes
on
0 Posts
No problem with tyre clearance on our wheels with the springs fitted. We always check tyre clearance without the spring fitted when engineering cars with larger wheels and tyres so that there will be no clearance issues under any conditions.
Mike
Mike
Trending Topics
#8
sorry to hijack your thread but can any one tell me if i buy a 03wrx from holland can i get the PPP fitted by prodrive other than through my local dealer. Essex area.
thanks
thanks
#14
Scooby Regular
Join Date: Feb 2000
Location: Hertfordshire
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
I had the PPP fitted to my STi7 3 weeks ago. It took 6 days between me ordering it and being phoned to say the parts had arrived.
I'd hassle your dealer a bit if I were you.
I'd hassle your dealer a bit if I were you.
#15
rang the dealer, reply was 2-3 wekks (roughly) thats 9 weeks in total plus the delivery time! Not over arsed with the power increase but i want the backbox as the car is soooo quiet (and the firestorm was TOO LOUD )...
#18
Me too, My car o3 wrx goes in for a repair mon 11/5/03, She was supposed to get ppp up, Since been told it could now be a couple of weeks.
A chap fro prodrive "dave" thought they were availible and could'nt understand what the delay was!!!
chris
http://www.scoobynet.co.uk/bbs/thread.asp?threadid=207610
Some more comments on the same subject.
cheers chris
[Edited by ( R6 CDW ) - 5/11/2003 4:02:02 PM]
A chap fro prodrive "dave" thought they were availible and could'nt understand what the delay was!!!
chris
http://www.scoobynet.co.uk/bbs/thread.asp?threadid=207610
Some more comments on the same subject.
cheers chris
[Edited by ( R6 CDW ) - 5/11/2003 4:02:02 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM