MY01/02 Dyno Results
#1
Has anybody got any dyno comparisons between a bog std MY01/02 and the following mods I'm considering:
Centre de-cat & back box + ITG panel filter.
If so what make of zaust have you got and what are the results?
Nigeyboy
Centre de-cat & back box + ITG panel filter.
If so what make of zaust have you got and what are the results?
Nigeyboy
#4
Scooby Regular
Join Date: Dec 2001
Location: Carnetix, Adams and Nitosport
Posts: 12,602
Likes: 0
Received 0 Likes
on
0 Posts
I think when I PPP's the car and then put in on a rolling road (ITG was fitted) it gave 246bhp.
Yeah none of the MY01/02 owners are interested in performance *ahem*!
Yeah none of the MY01/02 owners are interested in performance *ahem*!
#6
Scooby Regular
nigeyboy
Since you don't appear to have a PPP, the answers given so far are somewhat valueless
Answering the original question, a centre pipe, backbox and filter element will give negligible gain - probably 10bhp if you are lucky, which will be totally unnoticeable on the road apart from the extra noise.
On a MY01>, you have to change the downpipe too, and probably the up pipe, to get any worthwhile gains.
Since you don't appear to have a PPP, the answers given so far are somewhat valueless
Answering the original question, a centre pipe, backbox and filter element will give negligible gain - probably 10bhp if you are lucky, which will be totally unnoticeable on the road apart from the extra noise.
On a MY01>, you have to change the downpipe too, and probably the up pipe, to get any worthwhile gains.
Trending Topics
#8
Scooby Regular
Join Date: Dec 2001
Location: Carnetix, Adams and Nitosport
Posts: 12,602
Likes: 0
Received 0 Likes
on
0 Posts
Dave - We at least gave him something to think about!
Hmmm PPP and warrenty or MoTec and full decat (including up-pipe) along with no warrenty.
I would have to think carefully....
Hmmm PPP and warrenty or MoTec and full decat (including up-pipe) along with no warrenty.
I would have to think carefully....
#9
Nigeyboy -
I have myo1 fugly - ITG panel filter, scoobysport back box. Was dynoed at Power Engineering end of summer at 224bhp
28mb vid: http://www.applus.plus.com/video/APout.avi
I have myo1 fugly - ITG panel filter, scoobysport back box. Was dynoed at Power Engineering end of summer at 224bhp
28mb vid: http://www.applus.plus.com/video/APout.avi
#12
I've had the full de-cat treatment with ITG (bar up-pipe) , and Mr Croney himself said that his would unleash around 245bhp, 250 in up-pipe (don't know about torque figs tho).
Not had it on a RR (not that they really tell you much) but it makes hell of a difference - torque available from about 2900rpm so a lot more drivevable.
Just get yourself a secondhand scoobysport decat system for around £500 (d/p, centre and b/b - they crop up on here from time to time) and revel in a/ the noise and b/ the extra driveability.
Then get it ppp'd (if u like warranty) or ecutek'd and get 280bhp!
Not had it on a RR (not that they really tell you much) but it makes hell of a difference - torque available from about 2900rpm so a lot more drivevable.
Just get yourself a secondhand scoobysport decat system for around £500 (d/p, centre and b/b - they crop up on here from time to time) and revel in a/ the noise and b/ the extra driveability.
Then get it ppp'd (if u like warranty) or ecutek'd and get 280bhp!
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
hedgecutter
General Technical
3
25 September 2015 02:35 PM
mistermexican
Engine Management and ECU Remapping
11
13 September 2015 08:10 PM