ppp for MY00
#3
Had mine done 3.5 weeks ago and love it. Big improvement in mid range and it's lost the breathlessness above 6K rpm. It feels faster than my lightly modded 245bhp 98R. Even my Wife and 76 year old Mother agree.
Worth every penny and no warranty hassles. Fuel consumption up 4% in hard, general use and down 5% on fast A Roads/Dual Cs/Motorways.
Cheers
Mike
Worth every penny and no warranty hassles. Fuel consumption up 4% in hard, general use and down 5% on fast A Roads/Dual Cs/Motorways.
Cheers
Mike
#4
Scooby Regular
iTrader: (2)
Join Date: Mar 2001
Location: Swilling coffee at my lab bench
Posts: 9,096
Likes: 0
Received 0 Likes
on
0 Posts
I like my MY00's PPP a lot, but I agree it's expensive for what you get - which is quicker turbo spool-up for greater flexibility, coupled with a nice (if modest) extra shove at the top end.
How much warranty do you have left? You might be better off with, say, an exhaust swap and a Tek 2 remap at PE, which will be a lot cheaper for much the same result.
A.
How much warranty do you have left? You might be better off with, say, an exhaust swap and a Tek 2 remap at PE, which will be a lot cheaper for much the same result.
A.
#6
Scooby Regular
Join Date: Aug 2002
Location: ) 270bhp & 269lb/ft
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
I bought my car with the PPP already fitted but have driven non PPP'ed cars and found them very flat and lacking in torque. Get the downpipe replaced removing the other cat and it makes a big difference. Sounds great
With the full decat its been dyno'ed at 270BHP & 269lb/ft
(its in the dynomite scoobies section on here)
I extended my warranty too. Best thing I ever did! I've had a new clutch out of it already.
Peter
With the full decat its been dyno'ed at 270BHP & 269lb/ft
(its in the dynomite scoobies section on here)
I extended my warranty too. Best thing I ever did! I've had a new clutch out of it already.
Peter
Trending Topics
#8
Scooby Regular
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
If your still looking for a PPP ecu in a couple of weeks give us a bell / mail as mine may be up for grabs.( waiting for reply from BRD )
What do the rest of you think it's worth ?
Andy
What do the rest of you think it's worth ?
Andy
#9
Scooby Regular
Join Date: Jun 2002
Location: From the land of dings and dents
Posts: 4,556
Likes: 0
Received 0 Likes
on
0 Posts
Had the PPP, fitted onmy MY00 just after the car had been run in.
As you will realise from other people there are lots of other different options available for a lot less money Tek 2 for example.
Personally I would prefer to trust the people who live and breathe Subarus..... PRODRIVE
You know it makes sense.
As you will realise from other people there are lots of other different options available for a lot less money Tek 2 for example.
Personally I would prefer to trust the people who live and breathe Subarus..... PRODRIVE
You know it makes sense.
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
17
03 November 2021 11:07 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
aaron_ions
General Technical
1
17 September 2015 10:42 AM