Gearbox prices
Scooby Regular

Joined: Sep 2001
Posts: 9,465
Likes: 0
From: The Cheshire end of the emasculated Cat & Fiddle
I've just put 2nd hand 'box in mine as 3rd gear went for a burton.
I was looking at a bill of around £1300
to rebuild my 'box (94 Legacy Turbo), so I got a second hand unit, from a '99 UK spec car, from a specialist breaker for £500 +VAT and got it fitted for £200 by the main dealer.
The Breaker is called Grade A Subaru in Hayfield, Derbyshire, Tel 01663 744114.
I was looking at a bill of around £1300
to rebuild my 'box (94 Legacy Turbo), so I got a second hand unit, from a '99 UK spec car, from a specialist breaker for £500 +VAT and got it fitted for £200 by the main dealer.The Breaker is called Grade A Subaru in Hayfield, Derbyshire, Tel 01663 744114.
Thanks folks.
Katana, can you give me contact details for rally colin?
SiPie,
Does this include removal and refitting or is it just strip down, check for a prob and then rebuild?
[Edited by hail-hail - 10/22/2002 12:16:05 PM]
Katana, can you give me contact details for rally colin?
SiPie,
Stripdown and re-build time alone is 7 hours so add that into your equation
[Edited by hail-hail - 10/22/2002 12:16:05 PM]
Trending Topics
If you can get the box out then send it to Townend Garage , they will rebuild it for £450+vat , that is what they charged me to do mine . www.townendgarage.co.uk or tel 01524 733837
Hail hail
That was just strip down / have a look / rebuild time.....
Problem being that if teeth have been stripped
then the chances are they will be everywhere and if they rebuild it's not always 100% that it will run smooth in the future 
Good luck
That was just strip down / have a look / rebuild time.....
Problem being that if teeth have been stripped
then the chances are they will be everywhere and if they rebuild it's not always 100% that it will run smooth in the future 
Good luck
Thread
Thread Starter
Forum
Replies
Last Post




