STi7 RPM wire any idea's for Sat Nav,
15 September 2002, 08:14 AM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2000
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
I have posted this in electrical but after the colour quite urgent as I'm fitting sat nav system today.
Any1 have any idea where I can find the RP wire and what colour it is on a STI7.
IS there one allready in the radio harnes plug? as some cars do that.
If not anyone know what colour it is and where I can find it.
Cheers,
DAve.
Any1 have any idea where I can find the RP wire and what colour it is on a STI7.
IS there one allready in the radio harnes plug? as some cars do that.
If not anyone know what colour it is and where I can find it.
Cheers,
DAve.
15 September 2002, 08:48 AM
#2
Scooby Regular
Join Date: Mar 2001
Location: Glos UK. - Manufacturers of ECU Data Monitors.
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
This may help, can't guarantee it's the same but would be very surprised if not.
MY02 ECU pinouts got to "Technical Docs", then "Wiring Guides" then down to "MY2002".
simon
[Edited by PCB - 9/15/2002 8:49:23 AM]
[Edited by PCB - 9/15/2002 8:52:42 AM]
MY02 ECU pinouts got to "Technical Docs", then "Wiring Guides" then down to "MY2002".
simon
[Edited by PCB - 9/15/2002 8:49:23 AM]
[Edited by PCB - 9/15/2002 8:52:42 AM]
15 September 2002, 01:10 PM
#3
Scooby Regular
Dave,
the above webpage is the one I used to wire in my Panasonic Navi unit in my STI UK.
Any questions you need about fitting just let me know.
Regards,
Rob.
the above webpage is the one I used to wire in my Panasonic Navi unit in my STI UK.
Any questions you need about fitting just let me know.
Regards,
Rob.
15 September 2002, 09:32 PM
#4
Scooby Regular
Thread Starter
Join Date: Sep 2000
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
hm read this lot 1 late.
I have used the green/white on the plug behind and connected to the dash clocks.
Trouble is on discconnecting them and reconnecting them the engine management light stays on.
Does this need a factory reset from Subaru??
I have used the green/white on the plug behind and connected to the dash clocks.
Trouble is on discconnecting them and reconnecting them the engine management light stays on.
Does this need a factory reset from Subaru??
15 September 2002, 11:35 PM
#5
Scooby Regular
Dave,
This is how I connected my speed pulse on my old RB5 and didn't get any error lights.
I don't think it's bad, as you say may need a reset but get it checked out.
Regards,
Rob.
This is how I connected my speed pulse on my old RB5 and didn't get any error lights.
I don't think it's bad, as you say may need a reset but get it checked out.
Regards,
Rob.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
