Radiator Grill Badge fitment
04 June 2001, 10:41 PM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2000
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know how to fit the badge? - Looking
under the bonnet, it looks like its all connected and that you have to take the whole
grill out first - which looks complicated....
beginning to wish I had'nt bothered getting hold of the pink STI badge now!
Clear side repeaters on the way as well but they must be a lot easier...
Cheers for any advice you can give me
Trevor
under the bonnet, it looks like its all connected and that you have to take the whole
grill out first - which looks complicated....
beginning to wish I had'nt bothered getting hold of the pink STI badge now!
Clear side repeaters on the way as well but they must be a lot easier...
Cheers for any advice you can give me
Trevor
04 June 2001, 10:52 PM
#2
Scooby Regular
iTrader: (3)
Join Date: Dec 1999
Location: UK
Posts: 13,274
Likes: 0
Received 0 Likes
on
0 Posts
Trevor,
It's simple!
1) Take a screwdriver (cover the tip with a cloth, so you don't scratch the grill), and gently prise the current badge off.
Don't prise it in one place, or the badge will crack.
The badge is only held on with a sticky pad.
2) Once it's off, clean the space left, with meths (or something similar)
3) Stick on new pink badge!
4) Admire your handywork!!
Seriously, it's that easy!!
Andy
PS - Drop me a mail if you have any issues!
It's simple!
1) Take a screwdriver (cover the tip with a cloth, so you don't scratch the grill), and gently prise the current badge off.
Don't prise it in one place, or the badge will crack.
The badge is only held on with a sticky pad.
2) Once it's off, clean the space left, with meths (or something similar)
3) Stick on new pink badge!
4) Admire your handywork!!
Seriously, it's that easy!!
Andy
PS - Drop me a mail if you have any issues!
04 June 2001, 10:57 PM
#3
Scooby Regular
iTrader: (3)
Join Date: Dec 1999
Location: UK
Posts: 13,274
Likes: 0
Received 0 Likes
on
0 Posts
The side indicators are fairly easy as well! You'll get the idea when you see the design of the clear lense.
Get hold of the indicator, and push it towards the front of the car. The side nearest the door will pivot out.
Twist the bulb holder, and the lense will become free.
Pull out clear bulb, and replace with the orange bulb supplied.
Twist the bulb holder onto the clear lense.
Put the lug towards the front of the car in first, and the rear bit nearest the door will clip straight in.
Hope this helps
Andy
PS - The instructions above are for MY93 to MY00. If you have a MY01 WRX, these instructions may be wrong.
Get hold of the indicator, and push it towards the front of the car. The side nearest the door will pivot out.
Twist the bulb holder, and the lense will become free.
Pull out clear bulb, and replace with the orange bulb supplied.
Twist the bulb holder onto the clear lense.
Put the lug towards the front of the car in first, and the rear bit nearest the door will clip straight in.
Hope this helps
Andy
PS - The instructions above are for MY93 to MY00. If you have a MY01 WRX, these instructions may be wrong.
that's a story!! 
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM