RCM thermal spacer
#1
Scooby Regular
Thread Starter
RCM thermal spacer
Hi guys
Just wondering if anyone has bought the RCM thermal spacer and did it make much of a difference.
I have to take the mainfold off soon to repaint it
Just wondering if anyone has bought the RCM thermal spacer and did it make much of a difference.
I have to take the mainfold off soon to repaint it
#2
Scooby Regular
I have a set on my car, mainly to give extra clearance for a 3” turbo inlet, however I can drive the car really hard and then put my hand on the inlet manifold afterwards and it’s luke warm. I am running a 4” thick FMIC too though.
#4
Scooby Regular
Thread Starter
#5
Scooby Regular
Thread Starter
#6
Scooby Regular
bought it for my build plus their alloy pulleys
Trending Topics
#8
Scooby Regular
Thread Starter
#10
Scooby Regular
Thread Starter
#11
Scooby Regular
#12
Scooby Regular
I fitted o-ring* type thermal spacers to my track car years ago (Not RCM, probably from AS performance or Advance Automotives)
I recall using an IR temp gauge before and after and could see a significant reduction in temperature of the intake manifold.
Its also worth putting thermal spacers between the coolant header tank and the intake too.
*Went for o-ring style because its a track car and often being pulled apart for inspection and repairs. O-rings can be reused for longer and are also much cheaper to replace than stock gaskets everytime you pull the manifold.
I recall using an IR temp gauge before and after and could see a significant reduction in temperature of the intake manifold.
Its also worth putting thermal spacers between the coolant header tank and the intake too.
*Went for o-ring style because its a track car and often being pulled apart for inspection and repairs. O-rings can be reused for longer and are also much cheaper to replace than stock gaskets everytime you pull the manifold.
Last edited by Jonny Cut Corners; 12 October 2023 at 01:02 PM.
Thread
Thread Starter
Forum
Replies
Last Post