Does these mean these headlights are HID
#6
Scooby Regular
iTrader: (2)
#7
Scooby Regular
Same set up as my hid 55 plate jdm Fsti lights , the item you have the photo of can be found on line , like ebay for not much , just search under the part number , they are sensitive to damp , the headlight bulbs can be upgraded which makes a lot of difference , don’t but cheap you will be wasting your money , a phillips or osram etc for about 50£ is well worth the upgrade , lights will be much better than standard , often the bulb type is written on the top part of the headlight 👍 , subaru want 140£ plus per bulb even if they do last a long time
Trending Topics
#8
So is it off a JDM headlight or just a standard UK STI? or are they both the same setup?
Same set up as my hid 55 plate jdm Fsti lights , the item you have the photo of can be found on line , like ebay for not much , just search under the part number , they are sensitive to damp , the headlight bulbs can be upgraded which makes a lot of difference , don’t but cheap you will be wasting your money , a phillips or osram etc for about 50£ is well worth the upgrade , lights will be much better than standard , often the bulb type is written on the top part of the headlight 👍 , subaru want 140£ plus per bulb even if they do last a long time
#9
Scooby Regular
that’s what i have as standard in my jdm fsti , subaru did sell uk cars with them fitted , you just need to find out when hid were fitted to uk cars , my 56 plate uk wagon im pretty sure had hids fitted , if you try partsouq or mezazip and put your chassis number in it may say what’s fitted as standard to yours , Don would also know the answer 👍
#10
Scooby Regular
Imprezas with HID headlamps fitted using the type of ballast originally shown were used for JDM Blobeye, Hawkeye, Hatch, WRX STI saloon models onwards and UK Hawkeye, Hatch, WRXSTI saloon models onwards.
JDM HID fitted Bugeye models used a different ballast arrangement.
Also used for UK HID model Foresters MY06(Facelift) onwards.
Most of which was covered in Beasties link - http://xenonland.com/product/1005/ma...2003-2012.html
JDM HID fitted Bugeye models used a different ballast arrangement.
Also used for UK HID model Foresters MY06(Facelift) onwards.
Most of which was covered in Beasties link - http://xenonland.com/product/1005/ma...2003-2012.html
Last edited by Don Clark; 28 December 2021 at 10:44 AM.
The following users liked this post:
#12
Scooby Regular
The ballast igniter as your first photo shows has to work with the correct bulb for the unit , it won’t work on any normal headlight bulb , so if you are asking if the unit will fit and you already have hid bulbs in your wrx then it may possibly work , if you have standard non hid bulbs then no , the igniter of what i’ve been told , in effect turns the bulb into a sort of output of a welder light , due to the high voltage going through it
#13
I have a pair of damaged HID headlights of a crashed STI, but ballast and the wiring is all there, just wondered if its a simple job of just swapping it all over to the WRX headlight unit, or is there other differences like inside the headlight, likes lenses etc?
The ballast igniter as your first photo shows has to work with the correct bulb for the unit , it won’t work on any normal headlight bulb , so if you are asking if the unit will fit and you already have hid bulbs in your wrx then it may possibly work , if you have standard non hid bulbs then no , the igniter of what i’ve been told , in effect turns the bulb into a sort of output of a welder light , due to the high voltage going through it
#16
Scooby Regular
if the wrx is not hid i expect things will be different , plus the hid will have headlight levellers , take the lights off and have a look is probably your most reliable route , the lights are on my Fsti are long winded to get off , but no that difficult to do 👍
Thread
Thread Starter
Forum
Replies
Last Post