Notices
ScoobyNet General General Subaru Discussion
Sponsored by:
Sponsored by:

Subaru newage rear arch repair

Thread Tools
 
Search this Thread
 
Old 11 June 2021, 07:54 AM
  #1  
Hawkins 1995
Scooby Regular
Thread Starter
 
Hawkins 1995's Avatar
 
Join Date: Jun 2017
Location: Pontypool
Posts: 610
Likes: 0
Received 67 Likes on 43 Posts
Default Subaru newage rear arch repair

Hi guys

Who is everyone using to have there rear archs done ours is starting to go on the inside so want to get them done before they get any worse, tempted to get the whole car refreshed at the same time.
We are in South Wales but can travel got a budget of 4k
Old 11 June 2021, 11:25 AM
  #2  
jaygsi
Scooby Regular
iTrader: (46)
 
jaygsi's Avatar
 
Join Date: Apr 2007
Location: uk
Posts: 14,530
Received 256 Likes on 222 Posts
Default

4K lol wow, when you say doing your arches, do you mean rebuilding the strut turrets, or just outer arch panel, or removing the rear quarter and going on a rust hunt?
Old 11 June 2021, 11:38 AM
  #3  
Gambit
Scooby Regular
iTrader: (6)
 
Gambit's Avatar
 
Join Date: May 2003
Location: Belfast
Posts: 3,285
Received 231 Likes on 172 Posts
Default

4k to get the arches repaired and the car refreshed isnt a 'wow' figure, its a realistic figure to get done properly.
The following 2 users liked this post by Gambit:
Old 11 June 2021, 11:40 AM
  #4  
Hawkins 1995
Scooby Regular
Thread Starter
 
Hawkins 1995's Avatar
 
Join Date: Jun 2017
Location: Pontypool
Posts: 610
Likes: 0
Received 67 Likes on 43 Posts
Default

Originally Posted by jaygsi
4K lol wow, when you say doing your arches, do you mean rebuilding the strut turrets, or just outer arch panel, or removing the rear quarter and going on a rust hunt?
For 4 I would want the car resprayed as well tbh this is what they are like atm the black stuff is some anti rust I put on it for know



Old 11 June 2021, 11:42 AM
  #5  
Hawkins 1995
Scooby Regular
Thread Starter
 
Hawkins 1995's Avatar
 
Join Date: Jun 2017
Location: Pontypool
Posts: 610
Likes: 0
Received 67 Likes on 43 Posts
Default

Originally Posted by Gambit
4k to get the arches repaired and the car refreshed isnt a 'wow' figure, its a realistic figure to get done properly.
That's what I thought I have had 2 quotes so far 7200 from scr to do the archs as they take everything off

5000 from a boy on the prodrive edition sti page was 4000 not so long back but paints looks like it's gone up a grand haha
Old 11 June 2021, 12:10 PM
  #6  
johno01
Scooby Regular
 
johno01's Avatar
 
Join Date: Oct 2015
Location: north west
Posts: 2,118
Received 670 Likes on 519 Posts
Default

Originally Posted by Hawkins 1995
For 4 I would want the car resprayed as well tbh this is what they are like atm the black stuff is some anti rust I put on it for know


apologies for the dumb question mate but where exactly are the 2 top pictures on your car? What have you stripped out to gain access etc...thanks
Old 11 June 2021, 12:12 PM
  #7  
Hawkins 1995
Scooby Regular
Thread Starter
 
Hawkins 1995's Avatar
 
Join Date: Jun 2017
Location: Pontypool
Posts: 610
Likes: 0
Received 67 Likes on 43 Posts
Default

Originally Posted by johno01
apologies for the dumb question mate but where exactly are the 2 top pictures on your car? What have you stripped out to gain access etc...thanks
Thats the inside of the wheel well on the back on both sides in by the boot
The following users liked this post:
Old 11 June 2021, 12:16 PM
  #8  
johno01
Scooby Regular
 
johno01's Avatar
 
Join Date: Oct 2015
Location: north west
Posts: 2,118
Received 670 Likes on 519 Posts
Default

Originally Posted by Hawkins 1995
Thats the inside of the wheel well on the back on both sides in by the boot
thank you mate 👍
Old 11 June 2021, 12:25 PM
  #9  
Hawkins 1995
Scooby Regular
Thread Starter
 
Hawkins 1995's Avatar
 
Join Date: Jun 2017
Location: Pontypool
Posts: 610
Likes: 0
Received 67 Likes on 43 Posts
Default

Originally Posted by johno01
thank you mate 👍
No worries
Old 11 June 2021, 08:48 PM
  #10  
jaygsi
Scooby Regular
iTrader: (46)
 
jaygsi's Avatar
 
Join Date: Apr 2007
Location: uk
Posts: 14,530
Received 256 Likes on 222 Posts
Default

It's a insane price for outer arches. You'd be an idiot paying that. Place round my end known for being over priced quoted a grand for one side and respraying a panel and other arch.

Most places quoted £500 for the same job. Inner strut turrets are different. But still not a 4K job.


Originally Posted by Gambit
4k to get the arches repaired and the car refreshed isnt a 'wow' figure, its a realistic figure to get done properly.
Old 11 June 2021, 08:51 PM
  #11  
Hawkins 1995
Scooby Regular
Thread Starter
 
Hawkins 1995's Avatar
 
Join Date: Jun 2017
Location: Pontypool
Posts: 610
Likes: 0
Received 67 Likes on 43 Posts
Default

Originally Posted by jaygsi
It's a insane price for outer arches. You'd be an idiot paying that. Place round my end known for being over priced quoted a grand for one side and respraying a panel and other arch.

Most places quoted £500 for the same job. Inner strut turrets are different. But still not a 4K job.
Would like the full car resprayed for that to like
Old 11 June 2021, 09:26 PM
  #12  
jaygsi
Scooby Regular
iTrader: (46)
 
jaygsi's Avatar
 
Join Date: Apr 2007
Location: uk
Posts: 14,530
Received 256 Likes on 222 Posts
Default

Yea same here. Not had a quote like that from anyone. But as said depends how much you want done. Some guy on here had the rear quarters removed replaced and any rust removed. Had loads done, but he'd owned it from new. And worked out it would be cheaper than buying a new Impreza.


Originally Posted by Hawkins 1995
Would like the full car resprayed for that to like
Old 11 June 2021, 09:28 PM
  #13  
ade_sti
Scooby Regular
iTrader: (2)
 
ade_sti's Avatar
 
Join Date: Sep 2005
Location: Spain
Posts: 843
Received 31 Likes on 20 Posts
Default

I love my Subaru but I would not pay 4K for something that may end up coming back. I would sell it and find a better base to start again with.

Just from my experience - All the best with the car though.
Old 11 June 2021, 09:38 PM
  #14  
Hawkins 1995
Scooby Regular
Thread Starter
 
Hawkins 1995's Avatar
 
Join Date: Jun 2017
Location: Pontypool
Posts: 610
Likes: 0
Received 67 Likes on 43 Posts
Default

Originally Posted by jaygsi
Yea same here. Not had a quote like that from anyone. But as said depends how much you want done. Some guy on here had the rear quarters removed replaced and any rust removed. Had loads done, but he'd owned it from new. And worked out it would be cheaper than buying a new Impreza.
I just want the rust cut out and a refresh on the paint doesn't have to be showroom as its a daily and will be doing a bit of track time with it this will be the only scooby we have coming up 5 years with her now haha
Old 11 June 2021, 09:39 PM
  #15  
Hawkins 1995
Scooby Regular
Thread Starter
 
Hawkins 1995's Avatar
 
Join Date: Jun 2017
Location: Pontypool
Posts: 610
Likes: 0
Received 67 Likes on 43 Posts
Default

Originally Posted by ade_sti
I love my Subaru but I would not pay 4K for something that may end up coming back. I would sell it and find a better base to start again with.

Just from my experience - All the best with the car though.
If it was a wrx we would but not many sti prodrive style about anymore
The following users liked this post:
Old 12 June 2021, 12:55 AM
  #16  
jaygsi
Scooby Regular
iTrader: (46)
 
jaygsi's Avatar
 
Join Date: Apr 2007
Location: uk
Posts: 14,530
Received 256 Likes on 222 Posts
Default

I need about same on mine, its been fully undersealed from new, so underneath is ok. Just rust on rear arches, turrets etc all fine, i spent ages washing them as seen owners on here with stunning inner arches, painted etc look cleaner than my loo lol


Originally Posted by Hawkins 1995
I just want the rust cut out and a refresh on the paint doesn't have to be showroom as its a daily and will be doing a bit of track time with it this will be the only scooby we have coming up 5 years with her now haha
Old 12 June 2021, 07:24 AM
  #17  
Vxr2010
Scooby Regular
 
Vxr2010's Avatar
 
Join Date: Oct 2015
Location: Herts
Posts: 2,321
Received 270 Likes on 234 Posts
Default

i’ve just been breaking my 05 fsti , 113 k on the clock , it had rusty sills and other areas coming up , plus rear near side rust on the outer arch which was not going away but did not look too bad and was not structural , i did under seal the car when i bought it , but i’m not sure if under sealed the inner arches , i took the coilover off and in went straight through the outer part of the turret , at least a fist sized hole , not even visible unless you poke the area , passed it’s mot in june , worrying rust that’s very hidden away
Old 12 June 2021, 08:10 AM
  #18  
ade_sti
Scooby Regular
iTrader: (2)
 
ade_sti's Avatar
 
Join Date: Sep 2005
Location: Spain
Posts: 843
Received 31 Likes on 20 Posts
Default

That is true - post some pics if you get the work done.

Originally Posted by Hawkins 1995
If it was a wrx we would but not many sti prodrive style about anymore
Old 13 June 2021, 11:38 AM
  #19  
Conor.s1
Scooby Regular
 
Conor.s1's Avatar
 
Join Date: Nov 2014
Location: Perth, Scotland
Posts: 51
Received 5 Likes on 3 Posts
Default

Having just done the exact thing to my own v7 STi prodrive uk I can comment a little based on experience.

4K is not a wow figure. It’s perfectly reasonable as a budget and will 100% be a steal of a price if you can get it (assuming no work done by you or any mates rates).

i was £5,000 for full respray, Windows out and repair numerous dents, rust spots around windscreen and bonnet etc. Repair of fibreglass front splitter too as they are discontinued from HTAutos now.

that included no welding.

i had the welding done by a friend of a friend and it was £650.

i bought OEM n/s and o/s sill sections from Subaru at £250 a side (have the part numbers if need be) and cut out the old ones. They didn’t show any signs of rust just the usual crushed jacking points and a little orange from below. Once off I was glad we replaced as they were starting to go really bad inside.

the welder fab’d the strut towers as the inner arches were not bad enough to fully replace. They weren’t far away though!

I baremetal’d the inner arches and underside and coated with rust bullet and raptor myself.

fully powder coat everything below and polybuahed everything.

total was circa 8k.

obviously you can discount some of the above but expect to pay £4K upwards atleast. Especially if you want a good job at the end.

to be fair I was shocked at how bad it was as I barely drove in the winter and garaged the car for 5+ years. I’ve had it for 8.

good luck and I hope you get what you’re looking for, for a good price! Enjoy!

Last edited by Conor.s1; 13 June 2021 at 11:40 AM.
Old 13 June 2021, 09:06 PM
  #20  
jaygsi
Scooby Regular
iTrader: (46)
 
jaygsi's Avatar
 
Join Date: Apr 2007
Location: uk
Posts: 14,530
Received 256 Likes on 222 Posts
Default

As I said all depends what he's having done. One of my Impreza's is currently having loads of body work done.

My mates doing it, sills, and rear arches in and out, he said chassis is solid just the inner skin is bad.

It's all been cut out, and just finished one sill.
Old 14 June 2021, 12:03 PM
  #21  
scooby kid
Scooby Regular
iTrader: (6)
 
scooby kid's Avatar
 
Join Date: Jul 2010
Location: hastings
Posts: 1,590
Received 11 Likes on 6 Posts
Default

My Bug Wrx was undersealed properly from new, it had no rust showing outside or on inner arches at all but when i broke it i found the turret walls where as thin as paper and broke through with some poking, front lower rad panel, and rear of sills bubbling inside out. so its best to go mad with a pencil camera before giving to someone as once there open it up it can be much further than thought, i Eden up buying a fresh import as was only 50% more than putting mine right and all ive had to do is cavity wax it all to last alot longer .
Old 14 June 2021, 12:12 PM
  #22  
johno01
Scooby Regular
 
johno01's Avatar
 
Join Date: Oct 2015
Location: north west
Posts: 2,118
Received 670 Likes on 519 Posts
Default

All this talk of rust makes me want to flog mine, it’s all doom and gloom. Mine is undersealed from new and I’ve had tonnes of work done underneath without any specialist raising any concerns but it’s all in the post for sure!!
Old 14 June 2021, 04:25 PM
  #23  
Hawkins 1995
Scooby Regular
Thread Starter
 
Hawkins 1995's Avatar
 
Join Date: Jun 2017
Location: Pontypool
Posts: 610
Likes: 0
Received 67 Likes on 43 Posts
Default

Originally Posted by johno01
All this talk of rust makes me want to flog mine, it’s all doom and gloom. Mine is undersealed from new and I’ve had tonnes of work done underneath without any specialist raising any concerns but it’s all in the post for sure!!
Haha made us wanted to sell ours I been to two garages that sprayed and repair scoobys they said it not bad at all both was around 1000 for just the archs and 3500-4500 for a full respray that's with the archs and jacking points done so happy days
The following users liked this post:
Old 15 June 2021, 06:19 PM
  #24  
jaygsi
Scooby Regular
iTrader: (46)
 
jaygsi's Avatar
 
Join Date: Apr 2007
Location: uk
Posts: 14,530
Received 256 Likes on 222 Posts
Default

All old cars rust, I really don't see the point of this conversion lol

Yes my strut turrets on my garaged Impreza are fine, but the inside skin in the strut turret closest to the arch feels thin. I think these rust from the inside, not sure where the water comes from, guessing boot area.

But the cars 23 years old. It's not doing too bad. Seen some cars half the age in worse, take the Ford Ka's, seen newer ones of those rotten a lot so bad, but plastic panels hiding it all from mot's.




Originally Posted by scooby kid
My Bug Wrx was undersealed properly from new, it had no rust showing outside or on inner arches at all but when i broke it i found the turret walls where as thin as paper and broke through with some poking, front lower rad panel, and rear of sills bubbling inside out. so its best to go mad with a pencil camera before giving to someone as once there open it up it can be much further than thought, i Eden up buying a fresh import as was only 50% more than putting mine right and all ive had to do is cavity wax it all to last alot longer .
Old 15 June 2021, 06:29 PM
  #25  
Hawkins 1995
Scooby Regular
Thread Starter
 
Hawkins 1995's Avatar
 
Join Date: Jun 2017
Location: Pontypool
Posts: 610
Likes: 0
Received 67 Likes on 43 Posts
Default

Originally Posted by jaygsi
All old cars rust, I really don't see the point of this conversion lol

Yes my strut turrets on my garaged Impreza are fine, but the inside skin in the strut turret closest to the arch feels thin. I think these rust from the inside, not sure where the water comes from, guessing boot area.

But the cars 23 years old. It's not doing too bad. Seen some cars half the age in worse, take the Ford Ka's, seen newer ones of those rotten a lot so bad, but plastic panels hiding it all from mot's.

True like ours is not bad for a 19year old car like I just would like to sort stuff before they trun into a nightmare. Only problem I see I'd people seem to want to charge twice the price when they know you drive a sti haha I don't mind 3.5k for archs and a respray though




All times are GMT +1. The time now is 08:00 PM.