Gills

Hi all,

so I’m getting through a pretty much standard build on a v1 sti with the only mods of 440cc injectors, v3sti heads, downpipe back exhaust and panel filter.

my question is I want to squeeze as much as I can from what I have as it’s a hobby car and not a daily, what boost could it possibly run and would I need a 3 bar map sensor?

am also looking at esl board to run this.

i know there will be certain restrictions I.e tmic, turbo and box but just need to know what sort of results I can push out of what I have and if I can up the boost

ossett2k2

iTrader: (9)

Max boost on your map sensor is around 1.25bar on my92-my96
the later my97/98 is around 1.7bar
You can fit the later map sensor.

Gills

ok great,

neil at Slowboy is going to do this when I have the esl fitted and mapped and I will supply the sensor.

is there any way or telling which one is right I.e part numbers?

or pics if possible? Would a v5 map sensor work

ossett2k2

iTrader: (9)

I'll take a pic of my v3sti sensor and post later,unless someone has part numbers a pic
@Don Clark

Gills

thanks mate much appreciated

ossett2k2

iTrader: (9)

Bit windy and wet out mate,not the best pic but...hth

ossett2k2

iTrader: (9)

Or this would of saved me getting wind swept

https://www.scoobynet.com/general-te...er-please.html

Gills

fantastic thanks I have just found one strait away for about 40 quid, comes with 2 port boost which I don’t need but is that about the right price?

rickybobby

I have one off a V5 STI in my Subaru box of random subaru things you can have for £25 posted. Drop me a pm if its of use

Gills

ok mate will do, just need to confirm that it will fit and be ok for mine.

MattyB1983

iTrader: (51)

Yes V5 will be fine. You'll need to move the pins around to suit though remember.

Gills

ok thanks I’m getting Neil from Slowboy to install this anyway just want to make sure I get the right one