Fitted a GS340 pump and broke the fuel line clip - HELP
22 January 2018, 05:22 PM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2017
Location: Scotiand
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Fitted a GS340 pump and broke the fuel line clip - HELP
So,
Off work today as i did a 24hr MTB endurance race on Saturday, assuming im still tired.....
Anyway in my wisdom I decided to fit my Walbro gs340, the high pressure fuel clip was a ******* to get off, refitted it and it was leaking, then went to pull it back off and it snapped, completly.
What are my options? I have my MOT on Saturday haha.
Off work today as i did a 24hr MTB endurance race on Saturday, assuming im still tired.....
Anyway in my wisdom I decided to fit my Walbro gs340, the high pressure fuel clip was a ******* to get off, refitted it and it was leaking, then went to pull it back off and it snapped, completly.
What are my options? I have my MOT on Saturday haha.
22 January 2018, 06:45 PM
#2
Scooby Regular
Thread Starter
Join Date: Dec 2017
Location: Scotiand
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
So, I checked and the plastic fuel pipe is 6mm ID and the pipe on the tank is 8mm.
I have put 8mm gates fuel pipe
8mm to 6mm barbes metal connector
Jubilee clips
Just waiting on the connector coming, sent my idea to a mechanic and he reckons it will be fine. Will test it first so I don't become a fireball. I'm a firefighter so should be sound......
I have put 8mm gates fuel pipe
8mm to 6mm barbes metal connector
Jubilee clips
Just waiting on the connector coming, sent my idea to a mechanic and he reckons it will be fine. Will test it first so I don't become a fireball. I'm a firefighter so should be sound......
Thread
Thread Starter
Forum
Replies
Last Post
AsianGunner
General Technical
5
27 September 2006 03:02 PM
oceanstarBug
General Technical
1
13 September 2004 12:16 PM