any one north east fancy helping fitting up pipe :)
#1
Scooby Regular
Thread Starter
any one north east fancy helping fitting up pipe :)
any one local to give guidance to fit a up pipe lol
fitted downpipe etc that was ok but this seems alittle annoying hehe
can buy you some beers n that jazz
fitted downpipe etc that was ok but this seems alittle annoying hehe
can buy you some beers n that jazz
#5
Scooby Regular
You can leave it in place, but you will need to remove downpipe anyway.
This thread may be useful to you, but you may need to register to see the pictures..............
http://www.scoobymods.com/showthread...cobb-5157.html
This thread may be useful to you, but you may need to register to see the pictures..............
http://www.scoobymods.com/showthread...cobb-5157.html
#6
Scooby Regular
Thread Starter
You can leave it in place, but you will need to remove downpipe anyway.
This thread may be useful to you, but you may need to register to see the pictures..............
http://www.scoobymods.com/showthread...cobb-5157.html
This thread may be useful to you, but you may need to register to see the pictures..............
http://www.scoobymods.com/showthread...cobb-5157.html
The only bit I don't like is lifting the engine up, is that 100% nessercary??
#7
Scooby Regular
Only way to get clearance for the larger turbo flange past the chassis rails.
the forester engine sits lower than an Impreza one due to the spacers fitted between chassis and front crossmember.
Easiest way - remove turbo and pull it out via the top
Trending Topics
#12
Scooby Regular
Thread Starter
#13
Scooby Regular
#17
Scooby Regular
Thread Starter
So thought would crack on.. what a pretty satisfying easy job... every one makes it sound so scary ahaha... also been getting qauted £100 to do this job.. jeez...
#20
Scooby Regular
Thread Starter
#23
Scooby Regular
Thread Starter
#25
Dont be so easy to push this as an easy job
yes its easy if the turbo bolts undo
Did mine undo ?
No
queue turbo removal and hrs of bashing to remove the nuts from the studs so i could re-use my turbo
yes its an easy job, so is giving birth ....................
yes its easy if the turbo bolts undo
Did mine undo ?
No
queue turbo removal and hrs of bashing to remove the nuts from the studs so i could re-use my turbo
yes its an easy job, so is giving birth ....................
#26
Scooby Regular
Thread Starter
#27
Scooby Regular
Thread Starter