Jdm rear hub flange
#6
Scooby Regular
Thread Starter
I just got to wait till they come into stock then ring up iv tried jdm heir seems it's same everywhere, if you wanna see what extra parts jdm over the uk I find hurst cars writes a detailed description
Trending Topics
#9
Scooby Regular
I take it "rear wheel bearing hub flange" means "hub - rear axle"
Item 10 here..........
UK MY03 STi P/N 28462FE001
UK MY05 STi P/N 28462FE011
JDM MY03 STi P/N 28462FE001
JDM MY04 STi P/N 28462FE011
Part number depends if you have 5 x 100 or 5 x 114.3 wheel hubs
ICP has the 114 hub in stock but does not hold the 100 hub
Item 10 here..........
UK MY03 STi P/N 28462FE001
UK MY05 STi P/N 28462FE011
JDM MY03 STi P/N 28462FE001
JDM MY04 STi P/N 28462FE011
Part number depends if you have 5 x 100 or 5 x 114.3 wheel hubs
ICP has the 114 hub in stock but does not hold the 100 hub
#11
Scooby Regular
Not like the later Hatch/Legacy ones
You could try here
https://www.originparts.de/index.php...ram=28462FE001
From Germany, VAT inc at 19%, no import duty (EU) although it usually defaults to max postage charge.(which you can change)
You could try here
https://www.originparts.de/index.php...ram=28462FE001
From Germany, VAT inc at 19%, no import duty (EU) although it usually defaults to max postage charge.(which you can change)
#13
Scooby Regular
Thread Starter
Don iv typed that part number in and it says hub axle is part number 28462FE001 for this
https://www.importcarparts.co.uk/pic...HUB-FLANGE.JPG
https://www.importcarparts.co.uk/pic...HUB-FLANGE.JPG
#14
Scooby Regular
Don iv typed that part number in and it says hub axle is part number 28462FE001 for this
https://www.importcarparts.co.uk/pictures/28462FE011-SUBARU-114PDC-STI-REAR-WHEEL-HUB-FLANGE.JPG
https://www.importcarparts.co.uk/pictures/28462FE011-SUBARU-114PDC-STI-REAR-WHEEL-HUB-FLANGE.JPG
Not sure what you are getting at as you quote 28462FE001 and then show a link to a picture of 28462FE011.
Both *001 and *011 are virtually identical apart from the PCD of the wheel studs.
The picture in the post above was in response to RaggyDoo's comment where later hubs fitted to the Hatch/Salon and legacy come complete with bearing assembly as a unit.
Last edited by Don Clark; 24 June 2017 at 10:05 PM.