Turbo inlet pipe to MAF dimensions (V4 STI)
#1
Scooby Regular
Thread Starter
Turbo inlet pipe to MAF dimensions (V4 STI)
Are these dimensions different on non-STI models or is it different for JDM? What dimensions are the MAF / turbo inlet on non-STI models?
cheers,
Ash
cheers,
Ash
#3
Scooby Regular
Thread Starter
#5
Scooby Regular
Thread Starter
Thanks again. I'll have a measure tonight after work. It's amazing how different every Subaru is.
I've read lots of differing measurements everywhere ranging from 90mm on 98 WRX's to 84mm on 22b's etc ... hard to know without getting the ruler out.
I had my pipe off yesterday but I cant for the life of me remember the exact figures. I'm sure my MAF was around 80 maybe slightly more , and my turbo inlet was over 70.... agh!
I've read lots of differing measurements everywhere ranging from 90mm on 98 WRX's to 84mm on 22b's etc ... hard to know without getting the ruler out.
I had my pipe off yesterday but I cant for the life of me remember the exact figures. I'm sure my MAF was around 80 maybe slightly more , and my turbo inlet was over 70.... agh!
#6
Scooby Senior
iTrader: (68)
you've set me off now had a good search around these are defo correct lol
Impreza GC8 EJ20 WRX/STI Vers 3/4 90mm Maf ~ turbo 55mm Classic (1)
http://www.sfsperformance.co.uk/prod...sp?make=subaru
Impreza GC8 EJ20 WRX/STI Vers 3/4 90mm Maf ~ turbo 55mm Classic (1)
http://www.sfsperformance.co.uk/prod...sp?make=subaru
#7
Scooby Regular
Thread Starter
you've set me off now had a good search around these are defo correct lol
Impreza GC8 EJ20 WRX/STI Vers 3/4 90mm Maf ~ turbo 55mm Classic (1)
http://www.sfsperformance.co.uk/prod...sp?make=subaru
Impreza GC8 EJ20 WRX/STI Vers 3/4 90mm Maf ~ turbo 55mm Classic (1)
http://www.sfsperformance.co.uk/prod...sp?make=subaru
Trending Topics
#10
Scooby Senior
iTrader: (68)
Kit 001B
https://www.viperperformance.co.uk/p...php?xscId=9934
#12
Scooby Regular
Thread Starter
For anyone that cares (and after scouring many posts online with different figures I feel some do!)
I measured the MAF to turbo inlet hose yesterday.
The inside diameter connecting to MAF is 89 mm, and the inside diameter connecting to the turbo inlet hose is 76mm. This is on a V4 JDM STI.
I measured the MAF to turbo inlet hose yesterday.
The inside diameter connecting to MAF is 89 mm, and the inside diameter connecting to the turbo inlet hose is 76mm. This is on a V4 JDM STI.
Thread
Thread Starter
Forum
Replies
Last Post