Rbon91

iTrader: (6)

So where do I start..

Over the last 2 years I have been building my blob sti bit by bit doing all the work myself and saving what I can and putting it into the car.. finally 2 weeks ago I finished it. Got car on the road did about 20 miles and boom turbo went smoke covering the road, got car back to garage and took turbo off the car and half a litre of oil in the turbine! Anyway so sent turbo back to supplier and got it back the week after all sorted.. fitted it back to the car, started it up and no smoke running like a dream! Really happy loving it! Got the car to the local valeting company for a 2 stage buff and it looked awesome! That night was out in the car not driving it to hard car still on low boost 1.4 bar 400/400 on a fully forged 2.0 with spec c heads.. not pushing it At all! Bang bottom end went.. managed to limp the car home and put it back in the garage.. to say I'm gutted is a absolute understatement 😕..

But at least it looks well..

















Ryan

ZANY

Monstrous
Hope it gets well soon bud nice motor

MattyB1983

iTrader: (51)

Was it a fresh build .??

Rbon91

iTrader: (6)

Thanks pal, spoke to Andy at WMS today about building me another engine, not going to be cheap. Put everything I had into finishing it was looking forward to Spa and nurburg spring with it. Got a Suzuki GSXR so that's going up for sale unfortunately to help fund it.. 😕

Ryan

Rbon91

iTrader: (6)

Yeah mate fresh build.. ran in fine on the dyno no problems at all blew at 97 miles on the road 😣

Ryan

Emmaroids

iTrader: (2)

id get it stripped down and find out what has failed and see who if anyone is too blame as something serious has obviously gone wrong

Rbon91

iTrader: (6)

Bottom end has completely gone knocking it's nuts off! Car was running and boosting great. Like I said only on low boost so not even pushing it. Had my standard 2.0 at 460/420 for 2 years no problem at all
Ryan

Emmaroids

iTrader: (2)

so either engine builder or mapper is to blame unless you can pinpoint another issue that caused the failure.

Rbon91

iTrader: (6)

Yeah well engine builder got ill last year and disappeared, mapper ran it in and said it ran in fine and was a quiet engine so not sure who to go to apart from strip it see what's salvageable and go from there

Ryan

MattyB1983

iTrader: (51)

So a freshly built properly mapped motor let's go after just 97 miles ???

I guess you've spoken to the builder about fixing it ??

Rbon91

iTrader: (6)

Had engine 18 months in my garage mate. He got ill and disappeared last year

Kedlestone

iTrader: (9)

Shame to here, these cars can be very testing at times. I remember my old blob when I'd finished building it, took it over to the ring and straight off in to a barrier on the 2nd lap. Hit some oil put down by a 944. Thankfully most things can be fixed and once back in the UK I had it stripped down and rebuilt.

MattyB1983

iTrader: (51)

Bad news fella, not a great deal you can do then.

When you say "mapper ran it in", did you lend him your car for a while then ??

Rbon91

iTrader: (6)

Yeah I was planning spa and ring trip in March time but may have to go on back burner 😕. In talks with Andy at WMS about building me a 2.35 bottom end now if I can sell my bike and go from there..

Rbon91

iTrader: (6)

Ran it in on the dyno mate

wrx300scooby

Sorry to hear the bad news. Must have cost a fortune too, shame you've got to sell the bike as well

Rbon91

iTrader: (6)

Yeah mate gutted but completely out of cash now from finishing the car, still needs, clutch, 4 AD08R tyres and couple little bits..



Going to miss the bike so much

scoobyboy1

iTrader: (16)

Sorry to hear the bad luck Always checked in on your project thread to see how you was getting on, and seen how much hard work you put into it.

Rbon91

iTrader: (6)

Cheer mate yeah I'm only 24 trying to build and run my own business as well as build and get the car ready. Was like a kid at Xmas when I finally got behind the wheel after all the money and effort! But these cars are here to test us I'm that far into the car now I can't turn back. Not just the engine I've done all the suspension, handling, breaks etc mods so I'm thousands in and can't give up.

Ryan

mickywrx

iTrader: (29)

Gutted for you Ryan.

alcazar

iTrader: (2)

Aye, bad news. But run in on a dyno, you mean engine out? TBH, I'd not trust that at all......

Rbon91

iTrader: (6)

No mate in car.. fully run in on the dyno for the day by the mapper

Ryan

Dave Y

iTrader: (52)

Are wms going to do the rebuild

jazzyjembreaze

iTrader: (11)

Silly question but you did change the oil after run in period & checked oil pressure was functioning ?
Sorry for the bad luck , like you said , you spend soend spend only to be let down ,, chin up , itl get fixed

Rbon91

iTrader: (6)

Yes mate had oil changed straight away

Rbon91

iTrader: (6)

Yes mate just looking at 2.35 option now as that far into car know that I may as well go all out if I can afford to anyway 😂

ossett2k2

iTrader: (9)

Gutted for you Ryan!
Only ever heard good things about WMS so hope they build you a nice one and you get sorted out soon,put the whole sorry story behind you and maybe when your dream car is rebuilt(awesome looking car btw) you can then save up for another bike

Best of luck with it all.

wrx300scooby

Ryan it sounds like you have done everything as it should be, I cannot understand what has gone wrong here, maybe someone else knows better?

Rbon91

iTrader: (6)

Thanks mate yeah love it.. be ready in a couple of months again

Rbon91

iTrader: (6)

Until I split engine we won't know my money is on oil pump or possible oil pick up line

Ryan