scoobyman2007

iTrader: (5)

Hi I need some help my clutch is slipping on my 95 Sti so am going to fit a new one but need to no the best way as have done loads but not on a Scooby and I have been told you can do it enging out or box out but just wondering what way is best and what I am going to need in parts if some one can help thanks

ditchmyster

iTrader: (7)

If you are diy on a driveway engine out everytime, should take 2hrs ish taking it easy for a first timer, gearbox out = pain in the **** on your back crawling in and out 50 times then the joy of dragging the box out and back in again along with the fun and games of fitting the clutch while you're under the car.

The other benefit of taking the engine out is it's in your face while you're fitting the clutch and you can do other things like fit new plugs with ease.

Gearbox out is a right fcukabout and takes about 4hrs then you have the joy of trying to get the ****** back in again while it's trying to kill you.

Not to mention scraped knuckles rust in eyes and neck ache for 2 days after.

engine crane, spanners and a jack to support the box.

staaf

iTrader: (1)

I did it box out on 4 jack stands, not the easiest way I think but pretty doable.

**jay**

iTrader: (1)

Access to ramps gearbox out
If not engine out, i actually prefer taking engine out its not a big job.

Neil XR

iTrader: (1)

engine out if on drive

gearbox out if access to 2 post lift and gearbox lift