Notices
ScoobyNet General General Subaru Discussion
Sponsored by:
Sponsored by:

Blobeye 2003 help idle problem

Thread Tools
 
Search this Thread
 
Old 15 December 2015, 07:27 PM
  #1  
Old Skool
Scooby Newbie
Thread Starter
 
Old Skool's Avatar
 
Join Date: Oct 2014
Location: Canvey island
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default Blobeye 2003 help idle problem

Help ,I have a 2003 blobeye,idle issue ,I start car up from cold stays on choke for about a minute on 1500 rpm,comes of choke and goes down to 800 rpm but as soon as I touch throttle pedal ,it goes back upto 1500 rpm and will not drop back down,so I bought a brand new Subaru idle control valve ,throttle position sensor,map sensor and a coolant temperature switch all new from Subaru,checked electrics ,and still got problem,can any one please come up with any suggestions.
Old 15 December 2015, 07:31 PM
  #2  
JDM_Stig
Scooby Regular
iTrader: (3)
 
JDM_Stig's Avatar
 
Join Date: Feb 2009
Location: Mount Weather
Posts: 5,840
Received 41 Likes on 33 Posts
Default

throttle cable is taking the wrong route or chafed inside ?
Old 15 December 2015, 07:35 PM
  #3  
Old Skool
Scooby Newbie
Thread Starter
 
Old Skool's Avatar
 
Join Date: Oct 2014
Location: Canvey island
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Hello mate looked at that disconnected it from throttle and car still does it when you Rev from throttle body
Old 15 December 2015, 07:39 PM
  #4  
JDM_Stig
Scooby Regular
iTrader: (3)
 
JDM_Stig's Avatar
 
Join Date: Feb 2009
Location: Mount Weather
Posts: 5,840
Received 41 Likes on 33 Posts
Default

is the throttle flap shutting ok, or gunked up and staying open a few mm allowing more air in ?
Old 15 December 2015, 07:43 PM
  #5  
Old Skool
Scooby Newbie
Thread Starter
 
Old Skool's Avatar
 
Join Date: Oct 2014
Location: Canvey island
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Cleaned up no gunk and shutting properly checked all round for air leaks and cannot find nothing real headache
Old 15 December 2015, 07:57 PM
  #6  
JDM_Stig
Scooby Regular
iTrader: (3)
 
JDM_Stig's Avatar
 
Join Date: Feb 2009
Location: Mount Weather
Posts: 5,840
Received 41 Likes on 33 Posts
Default

did u replace the gasket on the ICV ?
Old 15 December 2015, 08:26 PM
  #7  
Old Skool
Scooby Newbie
Thread Starter
 
Old Skool's Avatar
 
Join Date: Oct 2014
Location: Canvey island
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Hello yes brand new ice and gasket from subaru
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ian.
Subaru
16
29 February 2016 08:58 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
14 December 2015 01:25 PM
gtshow
General Technical
12
30 November 2015 09:06 AM
bustaMOVEs
Subaru Parts
1
26 November 2015 07:24 PM
Neeko1988
General Technical
3
22 November 2015 11:48 PM



Quick Reply: Blobeye 2003 help idle problem



All times are GMT +1. The time now is 09:18 PM.