silicone hoses
#1
Scooby Regular
Thread Starter
silicone hoses
I'm looking at buying a silicone hose kit for my 2005 sti, however the item says its a 2005 wrx, would these still fit or would they be different?
Ebay: 271660391331
Cheers
Ebay: 271660391331
Cheers
Last edited by Matt_STi; 28 March 2015 at 07:59 PM.
#2
Scooby Regular
iTrader: (2)
Join Date: Jan 2014
Location: Now in Thanet
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
I purchased a set of these hoses from same place for my classic - be prepared to trim some hoses - for instance top rad hose was too long causing a kink in the pipe. Nothing major but just means you don't get a factory smooth cut on the ends.
Apart from that they are ok, seem to do the job - you may have to tighten them up again once they have bedded in - I had to on my bottom rad hose as it was weeping.
Contact the seller to see if they do a separate kit for the STI? Although I'm fairly sure they are the same?
Apart from that they are ok, seem to do the job - you may have to tighten them up again once they have bedded in - I had to on my bottom rad hose as it was weeping.
Contact the seller to see if they do a separate kit for the STI? Although I'm fairly sure they are the same?
#4
Scooby Regular
Thread Starter
Cheers for the advice, I messaged seller yesterday but no reply and I was impatient and wanted to find out lol
#7
Scooby Regular
iTrader: (2)
Join Date: Jan 2014
Location: Now in Thanet
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
Yer mine could have just been a bad batch i guess, the quality is actually not too bad, but tbh I haven't many other hoses to compare them too except the oem ones.
They have the woven material running through them like Samcos do, and feel tough.
I've only used them for coolant hoses tho, but mine have been on there for almost a year now with no issues at all - just needed to re tighten them up after a few days but that's it.
They have the woven material running through them like Samcos do, and feel tough.
I've only used them for coolant hoses tho, but mine have been on there for almost a year now with no issues at all - just needed to re tighten them up after a few days but that's it.
Trending Topics
#16
Scooby Regular
Thread Starter
I did this morning yes, I've decided to pay a bit extra and use a company that can sting a sentence together. However after searching online, they will fit the STI
#18
Scooby Regular
Thread Starter
I'm going through these guys, replied same day and were very helpful! Also I'm if white aren't in stock, email them as they have a delivery coming in soon with all colours and they will hold a set back for you.
https://www.heavyset.co.uk/shop/sili...g-eyehawk-eye/
https://www.heavyset.co.uk/shop/sili...g-eyehawk-eye/
#22
Scooby Regular
iTrader: (2)
Join Date: Jan 2014
Location: Now in Thanet
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
Yer agree I think Samco, as nice as they are, are just too expensive for coolant hoses.
The trimming I had to do was very minor, and in total cost me £25 as they refunded me 50% for having to trim them, not bad considering they do the job just as well and look just as nice imo
The old Samco Turbo inlet hose that came off mine we completely shagged and pretty poor quality. Could just have been an old design, but for the new one I went with Viper Performance.
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM
jobegold@hotmail.co.uk
ScoobyNet General
2
27 September 2015 09:44 PM