GONZO01

iTrader: (6)

As the title says, I want to run a maffless set up on my Blobeye STI but I'm not sure how you go about doing it so need help on what to do and how to do it please everyone.

the shreksta

iTrader: (20)

you need a mafless induction kit and either alcatek ecu/carberry rom or syvecs ecu

**jay**

iTrader: (1)

Can keep the maf in there to save the removal of it if you dont fancy putting a cai and too leave the standard airbox. But yeh as above needs software and mapping or a change of ecu and a air density sensor fitted

GONZO01

iTrader: (6)

Thanks for the info guys.

bludgod

iTrader: (3)

you could also make your own blanking plate:
https://www.scoobynet.com/members-ga...ing-plate.html

then just stick a temp sensor in the manifold and run the MAF temperature wire to it so the ECU can read it. Lock off or remove the TGVs (if you have them) and load up carberry rom. It's a big jump in tuning though, if your not mapping it yourself best to go to someone who's done it before and have them set it up for you. The cost might outweigh the time spent on doing it yourslef (your time has value too dont' forget).