Any one know this car? BT07 hawkeye
#1
Any one know this car? BT07 hawkeye
Im back! Last logged in with my V5 sti in 2011..
Looking to get back in the fold and have agreed in principle a deal on the car from SJ specialist.
I have read up on SJ etc.. seems a nice fella
http://www.pistonheads.com/classifie...istory/2787740
Just thought I would ask if anybody knew this car as its modded etc.
I would hate to spend a fair sum of money to find its lived its life on track or been pranged etc.
Also, on this particular model I would would be very grateful if you gurus could tell me what to look out for and the common failure etc.
BIG thanks in advance
Shaun
Looking to get back in the fold and have agreed in principle a deal on the car from SJ specialist.
I have read up on SJ etc.. seems a nice fella
http://www.pistonheads.com/classifie...istory/2787740
Just thought I would ask if anybody knew this car as its modded etc.
I would hate to spend a fair sum of money to find its lived its life on track or been pranged etc.
Also, on this particular model I would would be very grateful if you gurus could tell me what to look out for and the common failure etc.
BIG thanks in advance
Shaun
#2
Scooby Regular
Join Date: Mar 2013
Location: Wales
Posts: 2,794
Likes: 0
Received 0 Likes
on
0 Posts
Well, first thing is 'mapped by Green Monster' - which isn't the same as 'Jolly Green Monster', so either they are trying it on or know little about the Subaru scene.
'Dual mapping options' - but doesn't say what they are (the 370 could be Meth).
ARP studs and Cosworth gaskets - but without forged pistons (which AREN'T mentioned) that's not a plus.
Litchfield Type 25 handling kit - I could possibly put one of them on, but could I set it up properly ?????????????????????????
'Turbosmart adjustable dump valve' - wtf?
All that being said, ask them about these things, and anything else others will mention.
You'll get an idea if SJ stands for 'Subaru Junk' or not.
'Dual mapping options' - but doesn't say what they are (the 370 could be Meth).
ARP studs and Cosworth gaskets - but without forged pistons (which AREN'T mentioned) that's not a plus.
Litchfield Type 25 handling kit - I could possibly put one of them on, but could I set it up properly ?????????????????????????
'Turbosmart adjustable dump valve' - wtf?
All that being said, ask them about these things, and anything else others will mention.
You'll get an idea if SJ stands for 'Subaru Junk' or not.
#3
Thanks, I will ask about the above.
I have been doing a lot of reading this evening seems this 2.5 has chocolate pistons?
The mapper thing.. I guess or hope they have just read that from the paperwork and not put in the full name by mistake.
Having perrin parts is a plus from what I have seen I.E not cheap would be a shame if its has had all of this and the H/G done but no pistons.
Are the power claims realistic without meth?
Regards
I have been doing a lot of reading this evening seems this 2.5 has chocolate pistons?
The mapper thing.. I guess or hope they have just read that from the paperwork and not put in the full name by mistake.
Having perrin parts is a plus from what I have seen I.E not cheap would be a shame if its has had all of this and the H/G done but no pistons.
Are the power claims realistic without meth?
Regards
#4
AS above really...
Similar to my spec tbh..
Although if it atleast hasn't had the pistons done it would be an absolute tragedy!! Also need rods doing aswell in a perfect world.
You'll want to see ALL receipts for ALL work done.. Obvioulsy goes without saying.
The ride will be very harsh IMHO.. And the bhp figure seems high?? But possible?
Similar to my spec tbh..
Although if it atleast hasn't had the pistons done it would be an absolute tragedy!! Also need rods doing aswell in a perfect world.
You'll want to see ALL receipts for ALL work done.. Obvioulsy goes without saying.
The ride will be very harsh IMHO.. And the bhp figure seems high?? But possible?
#6
Thanks again!
I will email in the morning for the full spec list. I have been assured that it comes with all the receipts for everything on the car.
Touch wood because I really like this car.
I will email in the morning for the full spec list. I have been assured that it comes with all the receipts for everything on the car.
Touch wood because I really like this car.
#7
Scooby Regular
Join Date: Nov 2006
Location: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
I don't know this car and can't comment on it other than to say it could be good and is worth a really long look at.
You need to know if it's had a full engine build, and if you can't find the invoices, assume it hasn't.
Re the suspension, the Litchfield kit with the correct AST's is very good, and I'd say about the best for fast road use there is. Bear in mind that this is subjective, and to try the car yourself!
It's clearly had a lot of money spent on it, and if that does include a forged engine build, you're getting close to having the car free with the mods.
You need to know if it's had a full engine build, and if you can't find the invoices, assume it hasn't.
Re the suspension, the Litchfield kit with the correct AST's is very good, and I'd say about the best for fast road use there is. Bear in mind that this is subjective, and to try the car yourself!
It's clearly had a lot of money spent on it, and if that does include a forged engine build, you're getting close to having the car free with the mods.
Trending Topics
#8
Thank you Alan.
So what I am thinking then is that the deal breaker is all about the internals.
If the pistons are "that" bad and it hasn't been done I should walk away.
From talking to Scott at SJ I got the impression the modifications have been done for some time so in my brain that means either the map is really good not to det / melt the engine or it has indeed had internal work,
Regards
So what I am thinking then is that the deal breaker is all about the internals.
If the pistons are "that" bad and it hasn't been done I should walk away.
From talking to Scott at SJ I got the impression the modifications have been done for some time so in my brain that means either the map is really good not to det / melt the engine or it has indeed had internal work,
Regards
#11
Scooby Regular
Join Date: Mar 2013
Location: Wales
Posts: 2,794
Likes: 0
Received 0 Likes
on
0 Posts
Especially if it's then sat on a driveway with a knackered engine.
Hopefully op's questions will be answered and they'll be happy with their new car.
Glwtp
PS I can vouch for AJ's comments re. the Litchfield setup.
Hopefully op's questions will be answered and they'll be happy with their new car.
Glwtp
PS I can vouch for AJ's comments re. the Litchfield setup.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM