Tired under body
#1
Scooby Regular
Thread Starter
Tired under body
Who else's blob eyes are a little tired underneath? Underseal coming away etc? Rusty this rusty that, how much work would be involved getting it all clean and tidy again?
#2
Scooby Regular
iTrader: (5)
Join Date: Oct 2012
Location: North Yorkshire / Boston, MA
Posts: 1,907
Likes: 0
Received 1 Like
on
1 Post
The big gains you can make are:
Powdercoated wishbones, trailing arms, lateral links and gearbox/diff/etc support brackets.
Underseal wheel arches (use some brush-on Waxoyl/hammerite stuff)
There's a Bilt Hamber product called Deox-Gel which you can slop onto rusty components which aren't easily removed - and after a few hours the rust just wipes off. You need to protect/paint whatever you do though or the rust will soon be back.
When I get the opportunity to get my car off the road for a few weeks I'll be doing all of the above, it's all relatively inexpensive but a PITA on a daily.
Powdercoated wishbones, trailing arms, lateral links and gearbox/diff/etc support brackets.
Underseal wheel arches (use some brush-on Waxoyl/hammerite stuff)
There's a Bilt Hamber product called Deox-Gel which you can slop onto rusty components which aren't easily removed - and after a few hours the rust just wipes off. You need to protect/paint whatever you do though or the rust will soon be back.
When I get the opportunity to get my car off the road for a few weeks I'll be doing all of the above, it's all relatively inexpensive but a PITA on a daily.
#3
Scooby Regular
Thread Starter
God if I put any of that on some of it I think it would disappear :/ support brackets are in a bad way I think I would need new ones I'd say, cheers for the heads up, post some pictures of the progress I really need some motivation
Chris
Chris
#4
Scooby Regular
iTrader: (5)
Join Date: Oct 2012
Location: North Yorkshire / Boston, MA
Posts: 1,907
Likes: 0
Received 1 Like
on
1 Post
The Deox gel has is amazing, honest... some pics from some Coilovers I tidied up:
https://www.scoobynet.com/showpost.p...&postcount=141
https://www.scoobynet.com/showpost.p...&postcount=141
#5
Scooby Regular
Thread Starter
#7
Scooby Regular
Thread Starter
Cheers dude! Believe it or not I had it in the shower and with a soft toothbrush cleaned all the fins up and straightened them with some tweazers, the amount of flies and general crap that came out was astonishing so much so it must of been restrictive somewhat, I then sprayed it with hammerite cut a bit of cardboard to size to block the fins came up mint as you can see
Chris
Chris
Trending Topics
#8
Scooby Regular
Thread Starter
The other bits and bobs were just autoclym degreaser and a lot of scrubbing :/ I dremmeled the recirc valve although it is starting to go a bit pitted again....
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM