massive thanks to RA Motorsports in Perth
20 March 2014, 09:36 PM
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Nov 2011
Location: the rev limiter
Posts: 3,719
Likes: 0
Received 0 Likes
on
0 Posts
massive thanks to RA Motorsports in Perth
Just got back home from picking my car up from RA Motorsports in perth
Top notch service the whole way through and what a finish they done on my engine bay
It was starting to get dark so the pictures are a bit funny with the colour but will get some better photos tomorrow
and finished off with a remap with andy forrest which he said it will be between 345 - 350 BHP I would of got more but the RCM induction kit restricted it a little bit but I am very happy with the BHP I got with the remap.
If any of you are from this part of scotland RA Motorsports is a excellent place to get work done on your subaru
Top notch service the whole way through and what a finish they done on my engine bay
It was starting to get dark so the pictures are a bit funny with the colour but will get some better photos tomorrow
and finished off with a remap with andy forrest which he said it will be between 345 - 350 BHP I would of got more but the RCM induction kit restricted it a little bit but I am very happy with the BHP I got with the remap.
If any of you are from this part of scotland RA Motorsports is a excellent place to get work done on your subaru
Last edited by nizmo80; 20 March 2014 at 09:40 PM.
20 March 2014, 09:41 PM
#3
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Nov 2011
Location: the rev limiter
Posts: 3,719
Likes: 0
Received 0 Likes
on
0 Posts
I have dampers delivered on monday along with a set of super hellitones
also I had a nice blue powder coated alternator on but it died on us so put the old one on and RA Motorsport is spraying me a new one in the candy blue he done the other parts of my engine bay in
also I had a nice blue powder coated alternator on but it died on us so put the old one on and RA Motorsport is spraying me a new one in the candy blue he done the other parts of my engine bay in
Last edited by nizmo80; 20 March 2014 at 09:43 PM.
20 March 2014, 09:58 PM
#5
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Nov 2011
Location: the rev limiter
Posts: 3,719
Likes: 0
Received 0 Likes
on
0 Posts
cheers buddy
the colour in the pictures look a bit off
here is a picture with better colour
the colour in the pictures look a bit off
here is a picture with better colour
Last edited by nizmo80; 20 March 2014 at 10:03 PM.
Trending Topics
20 March 2014, 11:13 PM
#8
Scooby Regular
Join Date: Aug 2005
Location: My turbo blows, air lots of it!!
Posts: 9,073
Likes: 0
Received 0 Likes
on
0 Posts
Wish my engine bay looked like that, mine looks as if a bomb full of **** has exploded in it.
Andy is a top bloke, I get my work done there.
Andy is a top bloke, I get my work done there.
20 March 2014, 11:28 PM
#10
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Nov 2011
Location: the rev limiter
Posts: 3,719
Likes: 0
Received 0 Likes
on
0 Posts
Andy is a fantastic guy my car was at the end of the day when he was closing up and I had a chat to him for 15 mins and he sound as a pound.
cheers buddy
still a fair few bits in the engine bay I want to do but its really making me smile when I lift the bonnet
gona have to change your name to Jizmo Bay.
21 March 2014, 08:02 PM
#22
Scooby Regular
iTrader: (11)
Join Date: Feb 2011
Location: Newcastle upon tyne
Posts: 2,750
Likes: 0
Received 0 Likes
on
0 Posts
Yes , it will cope your right , but induction needs everything working with it to produce
Simple terms - suck squeeze bang blow
Anyway , if Harvey were here R.I.P.
He'd give you a full page right up on how the RCM lacks the punch of larger , & cylinder filters , I have tried them all ...
If your happy with your figures & your car works well
Leave it on I say . They certainly look cool
Regards
Simple terms - suck squeeze bang blow
Anyway , if Harvey were here R.I.P.
He'd give you a full page right up on how the RCM lacks the punch of larger , & cylinder filters , I have tried them all ...
If your happy with your figures & your car works well
Leave it on I say . They certainly look cool
Regards
21 March 2014, 08:07 PM
#23
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Nov 2011
Location: the rev limiter
Posts: 3,719
Likes: 0
Received 0 Likes
on
0 Posts
Plus things like ss headers, decat, ss exhaust, fuel pressure regulator, FMIC
dont know how much bhp would be achieved with all these mods plus the rcm induction kit tho but i will be finding out though
21 March 2014, 08:10 PM
#24
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Nov 2011
Location: the rev limiter
Posts: 3,719
Likes: 0
Received 0 Likes
on
0 Posts
Yes , it will cope your right , but induction needs everything working with it to produce
Simple terms - suck squeeze bang blow
Anyway , if Harvey were here R.I.P.
He'd give you a full page right up on how the RCM lacks the punch of larger , & cylinder filters , I have tried them all ...
If your happy with your figures & your car works well
Leave it on I say . They certainly look cool
Regards
Simple terms - suck squeeze bang blow
Anyway , if Harvey were here R.I.P.
He'd give you a full page right up on how the RCM lacks the punch of larger , & cylinder filters , I have tried them all ...
If your happy with your figures & your car works well
Leave it on I say . They certainly look cool
Regards
as thats what i will be aiming for once the stroker and bigger turbo goes on
21 March 2014, 10:45 PM
#26
Scooby Regular
Join Date: Aug 2005
Location: My turbo blows, air lots of it!!
Posts: 9,073
Likes: 0
Received 0 Likes
on
0 Posts
21 March 2014, 10:50 PM
#27
Scooby Regular
Join Date: Aug 2005
Location: My turbo blows, air lots of it!!
Posts: 9,073
Likes: 0
Received 0 Likes
on
0 Posts
21 March 2014, 10:56 PM
#29
Scooby Regular
iTrader: (11)
Join Date: Feb 2011
Location: Newcastle upon tyne
Posts: 2,750
Likes: 0
Received 0 Likes
on
0 Posts
Goin big maf the Perrin short ram big maf & filter works very well
Ideally using 800cc injectors as they are designed in conjunction to allow easy scaling to get the AFR spot on
Ideally using 800cc injectors as they are designed in conjunction to allow easy scaling to get the AFR spot on