Brembo rear brakes from 2008 Sti
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Nov 2000
Location: Norfolk
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
Brembo rear brakes from 2008 Sti
Calipers, pads, discs and pipes as removed from car.
As new condition. Done max 2k "running in" miles.
(Fronts Sold.)
Rears will fit 2008 WRX/SGT Scoob if you modify back plates or replace backplates with STi ones.
Ian Godney (Godspeed Brakes) has fitted 08 rear calipers to a 99 classic Scooby by machining a portion out.
Copied what Steve wrote from further down:
hi, the calipers have to be machined on the lugs to enable them to fit classic impreza's with sliding rear calipers, then you use a newage 290mm disc (170mm handbrake) machine the pads down to suit. job done.
100% correct info above as i was first to do this when others said it couldnt be done.
The discs can be drilled 5x100 pcd and fitted to sti 02> (or conversions) BUT i think a spacer needs to be used somewhere to correctly align disc in caliper as mounting face depth must vary on 08 sti compared to earlier discs.
Not sure which other year Scoobies they fit.
£225 ono + postage, for calipers, pads, discs.
rear 315mm dia
http://i31.photobucket.com/albums/c3...s/P1010254.jpg
As new condition. Done max 2k "running in" miles.
(Fronts Sold.)
Rears will fit 2008 WRX/SGT Scoob if you modify back plates or replace backplates with STi ones.
Ian Godney (Godspeed Brakes) has fitted 08 rear calipers to a 99 classic Scooby by machining a portion out.
Copied what Steve wrote from further down:
hi, the calipers have to be machined on the lugs to enable them to fit classic impreza's with sliding rear calipers, then you use a newage 290mm disc (170mm handbrake) machine the pads down to suit. job done.
100% correct info above as i was first to do this when others said it couldnt be done.
The discs can be drilled 5x100 pcd and fitted to sti 02> (or conversions) BUT i think a spacer needs to be used somewhere to correctly align disc in caliper as mounting face depth must vary on 08 sti compared to earlier discs.
Not sure which other year Scoobies they fit.
£225 ono + postage, for calipers, pads, discs.
rear 315mm dia
http://i31.photobucket.com/albums/c3...s/P1010254.jpg
Last edited by StanS; 31 August 2009 at 09:44 AM.
Trending Topics
#9
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Nov 2000
Location: Norfolk
Posts: 2,239
Likes: 0
Received 0 Likes
on
0 Posts
Hi,
Yes, had offer of £150, but thought they were worth more than that.
I believe that the holes can be drilled so discs would fit non Sti scoobs and that oversize shoes are available for the handbrake, but don't know for sure if these discs can be fitted to other scoobs.
Knowing for sure if they could be adapted to fit other scoobs would help sell them. (or not !)
They are upgrades for Forresters and SGT's as far as I know.
Stan
Yes, had offer of £150, but thought they were worth more than that.
I believe that the holes can be drilled so discs would fit non Sti scoobs and that oversize shoes are available for the handbrake, but don't know for sure if these discs can be fitted to other scoobs.
Knowing for sure if they could be adapted to fit other scoobs would help sell them. (or not !)
They are upgrades for Forresters and SGT's as far as I know.
Stan
#11
Scooby Regular
iTrader: (28)
Join Date: Dec 2006
Location: back of beyond(but nice roads;)
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
hi, the calipers have to be machined on the lugs to enable them to fit classic impreza's with sliding rear calipers, then you use a newage 290mm disc (170mm handbrake) machine the pads down to suit. job done.
100% correct info above as i was first to do this when others said it couldnt be done.
the discs can be drilled 5x100 pcd and fitted to sti 02> (or conversions) BUT i think a spacer needs to be used somewhere to correctly align disc in caliper as mounting face depth must vary on 08 sti compared to earlier discs.
hope this information helps sell them.
cheers steve
100% correct info above as i was first to do this when others said it couldnt be done.
the discs can be drilled 5x100 pcd and fitted to sti 02> (or conversions) BUT i think a spacer needs to be used somewhere to correctly align disc in caliper as mounting face depth must vary on 08 sti compared to earlier discs.
hope this information helps sell them.
cheers steve
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM