Fitting a new radio to our V reg Clio
#1
Fitting a new radio to our V reg Clio
As above
Slipped out the old radio to find it has 3 connectors on the back yet the conversion loom in the Panasonic new radio box only has two connectors that link into the single ISO needed for the new radio (see pics below).
Am I missing something stupid? is one of the old radio connectors for the steering wheel controls and can be left off?
Cheers
Shaun
Slipped out the old radio to find it has 3 connectors on the back yet the conversion loom in the Panasonic new radio box only has two connectors that link into the single ISO needed for the new radio (see pics below).
Am I missing something stupid? is one of the old radio connectors for the steering wheel controls and can be left off?
Cheers
Shaun
#2
Scooby Regular
Join Date: Jan 2013
Location: Barnsley
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Does the old radio link to a seperate screen in the dash as my corsa used the same and you only need the two ISO connectors to run the new radio as it has it's own built in screen.
I'm sure some of the ice gurus will provide more info though
Jon
I'm sure some of the ice gurus will provide more info though
Jon
#4
Scooby Regular
Join Date: Jan 2013
Location: Barnsley
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Hope this helps.
Jon
#5
Scooby Regular
if you wanted to keep the steering wheel controller you can buy additional cables but for what they cost its not worth it
also iirc from my clio you may have to swap the yellow and red cables
also iirc from my clio you may have to swap the yellow and red cables
Last edited by Ant; 05 January 2014 at 04:09 PM.
#6
Hi Ant /W1 8ean
Yep, that's it I think............lose the steering wheel controller which I don't use anyway
Another silly question (sorry) the old stereo has 4 holes in the front to remove but the new one has a flat key.....do I just bung the new radio in the same slot>
Thanks
Shaun
PS W1, are you a Bean or a Sean?
Yep, that's it I think............lose the steering wheel controller which I don't use anyway
Another silly question (sorry) the old stereo has 4 holes in the front to remove but the new one has a flat key.....do I just bung the new radio in the same slot>
Thanks
Shaun
PS W1, are you a Bean or a Sean?
#7
Scooby Regular
Join Date: Jan 2013
Location: Barnsley
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Hi Ant /W1 8ean Yep, that's it I think............lose the steering wheel controller which I don't use anyway Another silly question (sorry) the old stereo has 4 holes in the front to remove but the new one has a flat key.....do I just bung the new radio in the same slot> Thanks Shaun PS W1, are you a Bean or a Sean?
Hope this helps
Oh and yes it's Bean (old nickname that I had at school and has stuck for the last 18 yrs or so) lol!
Thread
Thread Starter
Forum
Replies
Last Post
Danny0608
Subaru
6
27 September 2015 02:16 PM
Danny0608
Subaru Parts
0
12 September 2015 02:59 PM