MX-5 Gauges and Fitting
#1
MX-5 Gauges and Fitting
I have sourced some DEFI's for the Scoob and now have the Prosport 52 mm Gauges spare. I have seen gauges sold and fitted for the MX-5 but cannot find a how to fitting guide. I was looking at fitting the Oil Temp, pressure and a matching coolant temp gauge. I take it that the electrics will wire up as normal from the cigarette lighter and normal feeds?
I have the fascia adaptor plate and all is ready to go. It's a K Plate JDM Eunos Roadster 1.6, manual.
Any help is appreciated.
I have the fascia adaptor plate and all is ready to go. It's a K Plate JDM Eunos Roadster 1.6, manual.
Any help is appreciated.
#4
Scooby Regular
iTrader: (52)
There is sure to be an plug you can pop out in the block and get one of those's adapters to insert the pressure sensor,without looking though I can't say exactly where mate.
The other option is another sandwich plate with 2 outlets and have the pressure one in with the temp?
The other option is another sandwich plate with 2 outlets and have the pressure one in with the temp?
Last edited by prodriverules; 22 May 2012 at 10:31 PM.
#5
There is sure to be an plug you can pop out in the block and get one of those's adapters to insert the pressure sensor,without looking though I can't say exactly where mate.
The other option is another sandwich plate with 2 outlets and have the pressure one in with the temp?
The other option is another sandwich plate with 2 outlets and have the pressure one in with the temp?
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM