Andy Forrest group mapping for 4 cars
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Location: The yorkshire dales - best roads in the UK
Posts: 3,311
Likes: 0
Received 0 Likes
on
0 Posts
Andy Forrest group mapping for 4 cars
I have spoke to Andy regarding a group mapping session for 4 cars fitted with an Apexi power fc. Its looking like the back end of July as my car is off the road while new parts are being fitted.
He will be travelling down and stopping over for 1 night so thats 2 cars a day being mapped.
If anyone one is interested then please add your names or pm me. Below is Andys email stating prices etc.
1. Do you have any days in June free
Available dates from the 16th of June.
2. What would the price be for 4 cars inc vat etc
Normally £240+vat + £280 total for travelling and overnight stop to split
between the 4 cars £70 each if I'm coming down to you. That adds up to
£352 per car. I would do it for £320 total per car.
3. What deposit do you need and when
Just the travelling cost needs to be paid up front. Either a cheque,
paypal or bank transfer would be fine.
4. Were would the mapping be done
Local motorways if I'm coming to you. Mainly 3rd gear stuff.
He will be travelling down and stopping over for 1 night so thats 2 cars a day being mapped.
If anyone one is interested then please add your names or pm me. Below is Andys email stating prices etc.
1. Do you have any days in June free
Available dates from the 16th of June.
2. What would the price be for 4 cars inc vat etc
Normally £240+vat + £280 total for travelling and overnight stop to split
between the 4 cars £70 each if I'm coming down to you. That adds up to
£352 per car. I would do it for £320 total per car.
3. What deposit do you need and when
Just the travelling cost needs to be paid up front. Either a cheque,
paypal or bank transfer would be fine.
4. Were would the mapping be done
Local motorways if I'm coming to you. Mainly 3rd gear stuff.
#2
Scooby Regular
iTrader: (2)
Join Date: Sep 2002
Location: West Yorkshire
Posts: 2,977
Likes: 0
Received 0 Likes
on
0 Posts
I'd be interested mate but I've got a newage and would be looking to do a tek3 remap for my 53 plate sti. Planning on adding a decat and new exhaust.
Dont know whether Andy could fit me in or whether the charge would be the same but would happily split his travel costs. He did a brilliant job to my Classic using the Apexi though.
Where abuots are you looking for him to come T5OLF?
Rob
Dont know whether Andy could fit me in or whether the charge would be the same but would happily split his travel costs. He did a brilliant job to my Classic using the Apexi though.
Where abuots are you looking for him to come T5OLF?
Rob
#4
Scooby Regular
Join Date: Jun 2005
Location: southyorkshirescoobys.co.uk
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Need some more info and i`ll look into that tonight by pm`ing you when i`m back in from work..
But if its what i`m looking for then i`m definately in...
Just also need to let me know the area this would take part in...
Thanks
But if its what i`m looking for then i`m definately in...
Just also need to let me know the area this would take part in...
Thanks
#5
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Location: The yorkshire dales - best roads in the UK
Posts: 3,311
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RLE
I'd be interested mate but I've got a newage and would be looking to do a tek3 remap for my 53 plate sti. Planning on adding a decat and new exhaust.
Dont know whether Andy could fit me in or whether the charge would be the same but would happily split his travel costs. He did a brilliant job to my Classic using the Apexi though.
Where abuots are you looking for him to come T5OLF?
Rob
Dont know whether Andy could fit me in or whether the charge would be the same but would happily split his travel costs. He did a brilliant job to my Classic using the Apexi though.
Where abuots are you looking for him to come T5OLF?
Rob
Andrew.
#6
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Location: The yorkshire dales - best roads in the UK
Posts: 3,311
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lordharding
Where abouts in the north eg cumbria/newcastle as £320 is a bargain
Trending Topics
#9
Scooby Regular
iTrader: (2)
Join Date: Sep 2002
Location: West Yorkshire
Posts: 2,977
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by T5OLF
I'm near Skipton area but i am willing to travel to make it easy for all of us. There is no motorway near me anyway so thats somthing we would need to sort between us.
#10
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Location: The yorkshire dales - best roads in the UK
Posts: 3,311
Likes: 0
Received 0 Likes
on
0 Posts
If the tek3 is a goer with AF then we are up the 3 including myself already!!
Cheers guys this moving much quicker than i expected
Cheers guys this moving much quicker than i expected
#11
Scooby Regular
Join Date: Jun 2005
Location: southyorkshirescoobys.co.uk
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Well i`ve been looking at something like the Apexi Power FC with Commander for my 2001 WRX Bugeye, but from what i can see they only do this ecu for up to the 2000 classic model.
So it looks like i`m up for the Ecutek 3...
Just a question, is the Ecutek 3 just a remap on the original ecu, or a replacement ecu which is then mapped...?
So if you could get a price for that aswell for me that would be great.
I`m in Sheffield by the way, same as Gatecrasher.
So it looks like i`m up for the Ecutek 3...
Just a question, is the Ecutek 3 just a remap on the original ecu, or a replacement ecu which is then mapped...?
So if you could get a price for that aswell for me that would be great.
I`m in Sheffield by the way, same as Gatecrasher.
#12
Scooby Regular
iTrader: (2)
Join Date: Sep 2002
Location: West Yorkshire
Posts: 2,977
Likes: 0
Received 0 Likes
on
0 Posts
You will need the same as me mate (Tek3). It maps the existing ecu rather than replacing it like the Apexi.
Your first one will be the expensive one as you will need to buy the license. Mine was £650.00 @ TSL but subsequent maps are obviously a lot less.
Your first one will be the expensive one as you will need to buy the license. Mine was £650.00 @ TSL but subsequent maps are obviously a lot less.
#13
Scooby Regular
Join Date: Jun 2005
Location: southyorkshirescoobys.co.uk
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
I`ve just emailed Andy on some advice on whats the best mods to get before he comes to map.
I`ve got the cold air induction kit and fully decatted 3" exhaust system.
Getting the oil temp, pressure and boost gauges fitted this weekend but wanted to know if he thinks i should also have the APEXI AVC-R boost controller fitted aswell, so i`ll let you know when i get a reply.
Also says on the site about group deals on Ecutek 3 maps.
So hopefully we can get a good group deal for Andy to come and sort our cars out.....
I`ve got the cold air induction kit and fully decatted 3" exhaust system.
Getting the oil temp, pressure and boost gauges fitted this weekend but wanted to know if he thinks i should also have the APEXI AVC-R boost controller fitted aswell, so i`ll let you know when i get a reply.
Also says on the site about group deals on Ecutek 3 maps.
A custom remap (also known as Tek3) has a RRP of £650. Volume discounts are available on this price and typical 'group buy' prices are £500-£550 depending on the number of cars booked in. Phone or email for details of the latest offers available.
#15
Scooby Regular
Join Date: Jun 2005
Location: southyorkshirescoobys.co.uk
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lordharding
Wonder if he would come to the NBO and do 100 cars
think of the discount we could get
think of the discount we could get
lol....well he can do 2 cars a day....
I dont fancy paying the hotel bill for 50 days...
#17
Scooby Regular
Join Date: Jun 2005
Location: southyorkshirescoobys.co.uk
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
So, we have:
01. T5OLF - mapping session for car fitted with an Apexi power fc. (Definate)
02. RLE - Tek 3 Remap.
03. lordharding - mapping session for car fitted with an Apexi power fc.
04. g01dmember - Tek 3 Remap. (Definate)
05. gatecrasher3 - mapping session for car fitted with an Apexi power fc.
06. anthscooby01 - Tek 3 Remap
So if we have 6, then we can get Andy down here for 3 days.
Please see if i`ve got your details right next to your names with the things you require, and confirm you are deinately in..Thanks...
Then T5OLF can speak to Andy on the cost for each of us.....
Sooner the better, want mine doing as soon as poss.....
Forgot to add, put where you are from aswell...Me and gatecrasher are in Sheffield...
01. T5OLF - mapping session for car fitted with an Apexi power fc. (Definate)
02. RLE - Tek 3 Remap.
03. lordharding - mapping session for car fitted with an Apexi power fc.
04. g01dmember - Tek 3 Remap. (Definate)
05. gatecrasher3 - mapping session for car fitted with an Apexi power fc.
06. anthscooby01 - Tek 3 Remap
So if we have 6, then we can get Andy down here for 3 days.
Please see if i`ve got your details right next to your names with the things you require, and confirm you are deinately in..Thanks...
Then T5OLF can speak to Andy on the cost for each of us.....
Sooner the better, want mine doing as soon as poss.....
Forgot to add, put where you are from aswell...Me and gatecrasher are in Sheffield...
Last edited by g01dmember; 25 May 2006 at 01:26 PM.
#18
Scooby Regular
iTrader: (2)
Join Date: Sep 2002
Location: West Yorkshire
Posts: 2,977
Likes: 0
Received 0 Likes
on
0 Posts
Yes I'm in too mate assuming he can do the Tek3 remap but was working to T5OLF's timescale. Says on his original post that his car is off the road until July. This suits me better as I'm thinking about whether to go for a 20G turbo or not.
I'm 2 minutes away from T5OLF incidentally (Skipton) although I dont think we've ever met. Is yours a blue one with gold alloys mate?
Will work around everyone else although at this rate we'll get 8 and can probably split the mapping days over two sessions ..... those willing to wait until July and those who want something a little sooner. Just an idea.
I'm 2 minutes away from T5OLF incidentally (Skipton) although I dont think we've ever met. Is yours a blue one with gold alloys mate?
Will work around everyone else although at this rate we'll get 8 and can probably split the mapping days over two sessions ..... those willing to wait until July and those who want something a little sooner. Just an idea.
#19
Scooby Regular
Join Date: Jun 2005
Location: southyorkshirescoobys.co.uk
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
01. T5OLF - mapping session for car fitted with an Apexi power fc. (Definate)
02. RLE - Tek 3 Remap. (Definate)
03. lordharding - mapping session for car fitted with an Apexi power fc.
04. g01dmember - Tek 3 Remap. (Definate)
05. gatecrasher3 - mapping session for car fitted with an Apexi power fc.
06. anthscooby01 - Tek 3 Remap
If we can get two more, then we can have 2 blocks of 4....So get Andy down here twice for 2 days at a time...
So approx £70 plus the cost of the map....Which i`m hoping is gonna be about £500 plus Vat.....
02. RLE - Tek 3 Remap. (Definate)
03. lordharding - mapping session for car fitted with an Apexi power fc.
04. g01dmember - Tek 3 Remap. (Definate)
05. gatecrasher3 - mapping session for car fitted with an Apexi power fc.
06. anthscooby01 - Tek 3 Remap
If we can get two more, then we can have 2 blocks of 4....So get Andy down here twice for 2 days at a time...
So approx £70 plus the cost of the map....Which i`m hoping is gonna be about £500 plus Vat.....
#20
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Location: The yorkshire dales - best roads in the UK
Posts: 3,311
Likes: 0
Received 0 Likes
on
0 Posts
I have a red ra mate never comes out much. To be honest i may be ready sooner than July, i have to finish off my front mount and finish porting my headers, i work 4 on 4 off but i'm also trying to finish my kitchen before the wife leaves me(which would give more time i suppose)
I think we need a date sorting out that we all agree to asap so we all have something to aim for.
I think we need a date sorting out that we all agree to asap so we all have something to aim for.
#21
Scooby Regular
Join Date: Jun 2005
Location: southyorkshirescoobys.co.uk
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
I wonder if the weekend of the 24th and 25th of June is free..
Cause the weekend before is the Northern Big One @ Lightwater Valley on Sunday the 18th and on Sunday the 2nd of July is the JAP Show at Thoresby, and i`m going to both of these...
If anyone has any objections we need to know quick to get booked in for this or another date.
Come on chaps, we need confirmations on numbers to get the ball rolling, when we have got the final numbers we can then get the group price off Andy.
Cause the weekend before is the Northern Big One @ Lightwater Valley on Sunday the 18th and on Sunday the 2nd of July is the JAP Show at Thoresby, and i`m going to both of these...
If anyone has any objections we need to know quick to get booked in for this or another date.
Come on chaps, we need confirmations on numbers to get the ball rolling, when we have got the final numbers we can then get the group price off Andy.
#22
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Location: The yorkshire dales - best roads in the UK
Posts: 3,311
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by g01dmember
I wonder if the weekend of the 24th and 25th of June is free..
Cause the weekend before is the Northern Big One @ Lightwater Valley on Sunday the 18th and on Sunday the 2nd of July is the JAP Show at Thoresby, and i`m going to both of these...
If anyone has any objections we need to know quick to get booked in for this or another date.
Come on chaps, we need confirmations on numbers to get the ball rolling, when we have got the final numbers we can then get the group price off Andy.
Cause the weekend before is the Northern Big One @ Lightwater Valley on Sunday the 18th and on Sunday the 2nd of July is the JAP Show at Thoresby, and i`m going to both of these...
If anyone has any objections we need to know quick to get booked in for this or another date.
Come on chaps, we need confirmations on numbers to get the ball rolling, when we have got the final numbers we can then get the group price off Andy.
#23
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Sep 2005
Location: The yorkshire dales - best roads in the UK
Posts: 3,311
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by T5OLF
I'll need to check my rota as i work a rolling shift pattern
Off the 23/24/25/26
Last edited by T5OLF; 25 May 2006 at 05:35 PM.
#24
Scooby Regular
Join Date: Jul 2005
Location: Sheffield
Posts: 946
Likes: 0
Received 0 Likes
on
0 Posts
My PFC should arrive first week in June.
01. T5OLF - mapping session for car fitted with an Apexi power fc. (Definate)
02. RLE - Tek 3 Remap.
03. lordharding - mapping session for car fitted with an Apexi power fc.
04. g01dmember - Tek 3 Remap. (Definate)
05. gatecrasher3 - mapping session for car fitted with Apexi power fc. (Definate)
06. anthscooby01 - Tek 3 Remap
01. T5OLF - mapping session for car fitted with an Apexi power fc. (Definate)
02. RLE - Tek 3 Remap.
03. lordharding - mapping session for car fitted with an Apexi power fc.
04. g01dmember - Tek 3 Remap. (Definate)
05. gatecrasher3 - mapping session for car fitted with Apexi power fc. (Definate)
06. anthscooby01 - Tek 3 Remap
Last edited by gatecrasher3; 25 May 2006 at 05:44 PM.
#25
Scooby Regular
Join Date: Jun 2005
Location: southyorkshirescoobys.co.uk
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Right.....
We`ll keep it to 4 for the first mapping session then...
So we have 4 definates:
01. T5OLF - mapping session for car fitted with an Apexi power fc. (Definate)
02. g01dmember - Tek 3 Remap. (Definate)
03. gatecrasher3 - mapping session for car fitted with Apexi power fc. (Definate)
04. RLE - Tek 3 Remap.
I`ve got an email from Andy regarding costs:
For the mapping session with the Apexi Power FC already fitted is £320
And the cost for the Tek 3 Remap is £657.50
Both those prices include VAT and the travelling and accomadation charges Andy requires. (£70 each for the travelling)
If there is anymore interested then add your name to the list below so we can organise the next 4 to be done.
lordharding - mapping session for car fitted with an Apexi power fc.
anthscooby01 - Tek 3 Remap
We`ll keep it to 4 for the first mapping session then...
So we have 4 definates:
01. T5OLF - mapping session for car fitted with an Apexi power fc. (Definate)
02. g01dmember - Tek 3 Remap. (Definate)
03. gatecrasher3 - mapping session for car fitted with Apexi power fc. (Definate)
04. RLE - Tek 3 Remap.
I`ve got an email from Andy regarding costs:
For the mapping session with the Apexi Power FC already fitted is £320
And the cost for the Tek 3 Remap is £657.50
Both those prices include VAT and the travelling and accomadation charges Andy requires. (£70 each for the travelling)
If there is anymore interested then add your name to the list below so we can organise the next 4 to be done.
lordharding - mapping session for car fitted with an Apexi power fc.
anthscooby01 - Tek 3 Remap
#26
Scooby Regular
iTrader: (2)
Join Date: Sep 2002
Location: West Yorkshire
Posts: 2,977
Likes: 0
Received 0 Likes
on
0 Posts
I'm guessing that the mapping session for the Tek 3 would be the same as the Apexi mapping session (ie £320.00)
If so not a problem but I'll have to get cracking with the mods.
If so not a problem but I'll have to get cracking with the mods.
#27
Scooby Regular
Join Date: Jul 2005
Location: Sheffield
Posts: 946
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by go1dmember
And the cost for the Tek 3 Remap is £657.50
Originally Posted by RLE
I'm guessing that the mapping session for the Tek 3 would be the same as the Apexi mapping session (ie £320.00)
#28
Scooby Regular
iTrader: (2)
Join Date: Sep 2002
Location: West Yorkshire
Posts: 2,977
Likes: 0
Received 0 Likes
on
0 Posts
I already have the Tek 3 license mate-paid £650.00 @ TSL last year. The first one is the expensive one and tweaks are usually a lot less. I'd expect it to be in line witha remapping session for the Apexi but will probably need Andy to confirm so there are no surprises. Certainly wont be £657.50 though!!
Apologies for the confusion!
Apologies for the confusion!
#30
Scooby Regular
iTrader: (2)
Join Date: Sep 2002
Location: West Yorkshire
Posts: 2,977
Likes: 0
Received 0 Likes
on
0 Posts
Well I'm happy but could do with a price to confirm remap session only as per my previous post.
Will send him a PM now. Only gives me a limited window to buy the bits for the upgrade though.
Will send him a PM now. Only gives me a limited window to buy the bits for the upgrade though.