Rolling Road Day. TEG Sport. 28 January.
#1
Rolling Road Day. TEG Sport. 28 January.
I am organising a rolling road day with Steve Simpson at TEG Sport (Town End Garage), Sand Lane, Warton, Carnforth, LA5 9NJ Saturday, 28 January. There will be slots for a total of 20 no. cars with the first run at 08:30.
The equipment is a new state of the art Dyno Dynamics rolling road with movable bed, housed in a purpose built module with very impressive cooling fan arrangements. TEG Sport are already well known to many of you for their rally car activities, spare parts, tuning bits, dog boxes etc.
Warton is a short distance West of the M6 Junction 35, North of Carnforth. Precise directions will be given nearer the time.
The total cost will be £30, £10 in advance to avoid "no shows" and £20 on the day. As slots are limited, it is strictly first come firt served. If you want to attend please give your board name below along with your e-mail address, car type and brief spec.
More info will follow nearer the time.
Cheers,
Harvey.`
The equipment is a new state of the art Dyno Dynamics rolling road with movable bed, housed in a purpose built module with very impressive cooling fan arrangements. TEG Sport are already well known to many of you for their rally car activities, spare parts, tuning bits, dog boxes etc.
Warton is a short distance West of the M6 Junction 35, North of Carnforth. Precise directions will be given nearer the time.
The total cost will be £30, £10 in advance to avoid "no shows" and £20 on the day. As slots are limited, it is strictly first come firt served. If you want to attend please give your board name below along with your e-mail address, car type and brief spec.
More info will follow nearer the time.
Cheers,
Harvey.`
#2
Scooby Regular
iTrader: (1)
Join Date: Mar 2002
Location: North East Subaru Forum
Posts: 3,920
Likes: 0
Received 0 Likes
on
0 Posts
jonny gav- jonnygav@btopenworld.com
V4 sti type R
3" revolution exhaust
STI panel filter
walbro fuel pump
SARD fuel pressure reg
STI 8 intercooler
V4 sti type R
3" revolution exhaust
STI panel filter
walbro fuel pump
SARD fuel pressure reg
STI 8 intercooler
Last edited by jonny gav; 28 November 2005 at 01:03 PM.
#3
Scooby Regular
Join Date: Dec 2001
Location: Middlesbrough
Posts: 3,525
Likes: 0
Received 0 Likes
on
0 Posts
Yes please,
Ninnybobs
Ninnybobs@hotmail.com
MY01 WRX
Mods: TD05 18g Turbo,3" Revolution Exhaust, Supersprint headers, BRD Tek3, 565cc Injectors, etc
Cheers
Martin
Ninnybobs
Ninnybobs@hotmail.com
MY01 WRX
Mods: TD05 18g Turbo,3" Revolution Exhaust, Supersprint headers, BRD Tek3, 565cc Injectors, etc
Cheers
Martin
#5
Almost certainly me, work depending!!
Dxx - Dionxx@hotmail.com
MY00
Revolution exhaust
Bits and pieces other stuff done at AS Performance
Dxx - Dionxx@hotmail.com
MY00
Revolution exhaust
Bits and pieces other stuff done at AS Performance
#6
Harvey are they ok with automatics/four wheel drive??
If ok i'm in.
mal scoobymal@hotmail.com
SVX 1996
Bog standard apart from STI panel filter.
Mal
If ok i'm in.
mal scoobymal@hotmail.com
SVX 1996
Bog standard apart from STI panel filter.
Mal
#7
Scooby Regular
iTrader: (8)
i would like to be on this but im not sure if i will have my car mapped in time!!!
sbeattie@blueyonder.co.uk
2003 STI
turbo XS TMIC
sx fuel pressure reg
perrin inlet pipe
perrin cold air kit
full decat
hybrid twin scroll turbo
sbeattie@blueyonder.co.uk
2003 STI
turbo XS TMIC
sx fuel pressure reg
perrin inlet pipe
perrin cold air kit
full decat
hybrid twin scroll turbo
Trending Topics
#9
Scooby Regular
Join Date: Jun 2004
Location: :TyneTeesScoobies
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Will definately be up for it.
GraemeR-graeme_robertson3@hotmail.com
Mods are pretty much the same as when Jonny had it, apart from SX fuel pressure reg and a Hydrid front mount.
Cheers Graeme
GraemeR-graeme_robertson3@hotmail.com
Mods are pretty much the same as when Jonny had it, apart from SX fuel pressure reg and a Hydrid front mount.
Cheers Graeme
Last edited by GraemeR; 28 November 2005 at 10:18 PM.
#10
Scooby Regular
Join Date: Jan 2003
Location: P1 0790, Durham TTS
Posts: 952
Likes: 0
Received 0 Likes
on
0 Posts
Yes please,
PhilA - Phil.Atkinson@dsl.pipex.com
RB5 PPP
STI panel filter
STI intercooler
Full "Ninja" de-cat exhaust
PhilA - Phil.Atkinson@dsl.pipex.com
RB5 PPP
STI panel filter
STI intercooler
Full "Ninja" de-cat exhaust
Last edited by PhilA; 05 December 2005 at 08:50 AM.
#11
Scooby Regular
iTrader: (1)
Join Date: May 2003
Location: TTS
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Stevec820@msn.com
MY97 Uk turbo
TDo5
550cc injectors
Full de-cat Blitz Nur spec
megan headers
hybrid FMIC
Apexi PFC (Andy F)
Walbro fuel pump
SX reg
MY97 Uk turbo
TDo5
550cc injectors
Full de-cat Blitz Nur spec
megan headers
hybrid FMIC
Apexi PFC (Andy F)
Walbro fuel pump
SX reg
#13
NEEDS A ENGINE FIRST I BETTER GET ON BUILDING IT HAHA
Originally Posted by stevebt
i would like to be on this but im not sure if i will have my car mapped in time!!!
sbeattie@blueyonder.co.uk
2003 STI
turbo XS TMIC
sx fuel pressure reg
perrin inlet pipe
perrin cold air kit
full decat
hybrid twin scroll turbo
sbeattie@blueyonder.co.uk
2003 STI
turbo XS TMIC
sx fuel pressure reg
perrin inlet pipe
perrin cold air kit
full decat
hybrid twin scroll turbo
#15
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
I fancy this, MY94 WRX
TD05
Revolution Downpipe
De-cat centre
Magnex Exhaust
GReddy Profec B Boost Controller
mickywardle666@aol.com
TD05
Revolution Downpipe
De-cat centre
Magnex Exhaust
GReddy Profec B Boost Controller
mickywardle666@aol.com
Last edited by mickywrx; 30 November 2005 at 10:28 AM.
#16
Phil Pearce c/o scoobymal@hotmail.com
1995 Toyota Celica GT Four (fresh jap import)
Unknown mods-but goes quite well!!
Mal
1995 Toyota Celica GT Four (fresh jap import)
Unknown mods-but goes quite well!!
Mal
#17
Filling up nicely considering it is just under 2 months away.
The Celica is no problem although it may be best to run first or last.
An auto is no problem as long as the gear locks in something like 4th assuming it is a 4 speed auto. Again probably best to go at the start or the end.
When we get a few more names on the list I will circulate everybody or post regards the £10 deposits.
Alan, that is fine by me.
Regards,
Harvey.
The Celica is no problem although it may be best to run first or last.
An auto is no problem as long as the gear locks in something like 4th assuming it is a 4 speed auto. Again probably best to go at the start or the end.
When we get a few more names on the list I will circulate everybody or post regards the £10 deposits.
Alan, that is fine by me.
Regards,
Harvey.
#23
Scooby Senior
Well hello everyone can you put my type R down please Harvey.
Type R
GEMS ECU,
Hybrid FMIC
K&N Panel Filter
MD195S Turbo
HARVEY Headers
3" RCM Exhaust
440 injectors
SUBWRX1@AOL.COM
Type R
GEMS ECU,
Hybrid FMIC
K&N Panel Filter
MD195S Turbo
HARVEY Headers
3" RCM Exhaust
440 injectors
SUBWRX1@AOL.COM
Last edited by SUBTYPER; 30 November 2005 at 03:55 PM.
#24
theya are a few things that are bit wich will not list apart from following
honda civic type r
custom k20a3 block still 2000cc
aem ems
650cc injectors or 750cc
2 x 600lb hr fuel pumps
forged rods
forged pistons
forged crank
custom big end and main shells
custom main and head bolts
T61 turbo
spearco intercooler with c02 cooler
custom head gasket
custom 4" exhaust from turbo to tail
act 600flt custom clutch
turbonetcs evolution wastegate
greddy e01 boost cont
aeromotive fuel regulator
6an fuel lines and fittings
aem fuel rail
ngk no 8 racing plugs
+ gauges etc
think thats it
. anyone got a defi fuel press gauge in white face for sale
e mail xoautosports@hotmail.co.uk
honda civic type r
custom k20a3 block still 2000cc
aem ems
650cc injectors or 750cc
2 x 600lb hr fuel pumps
forged rods
forged pistons
forged crank
custom big end and main shells
custom main and head bolts
T61 turbo
spearco intercooler with c02 cooler
custom head gasket
custom 4" exhaust from turbo to tail
act 600flt custom clutch
turbonetcs evolution wastegate
greddy e01 boost cont
aeromotive fuel regulator
6an fuel lines and fittings
aem fuel rail
ngk no 8 racing plugs
+ gauges etc
think thats it
. anyone got a defi fuel press gauge in white face for sale
e mail xoautosports@hotmail.co.uk
Last edited by xoctr; 01 December 2005 at 09:22 AM.
#26
turbo is a turbonetics super t61 will be running around 25psi . i do have gt40 on order but if comes by then dont know as this new one has a higher cfm than t61 wich will produce same power at 17psi than the t61 produces at 25psi
#27
Scooby Regular
iTrader: (1)
I wouldn't mind knowing what my car is putting out, but it's nothing exciting just....
MY98 PPP
toe_scooby@hotmail.com
If you get more exciting cars than just my PPP Harvey, i don't mind standing aside and just coming to watch.
Tony.
MY98 PPP
toe_scooby@hotmail.com
If you get more exciting cars than just my PPP Harvey, i don't mind standing aside and just coming to watch.
Tony.
#28
Scooby Senior
Well i know this aint got much to do with the rolling road but thought you would all like to know that I am a proud father again to a baby Boy 8lb 10oz named Robert Michael Clayton. Another member of the Subaru Clan.