Battery charging,not too dumb i hope.
#1
Scooby Regular
Thread Starter
Join Date: Mar 2008
Location: lincoln
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Battery charging,not too dumb i hope.
i have a 12v motorcycle battery that i charged 2 days ago overnight.I went to use battery today and not enough juice.I have checked the output of charger only with no battery attatched with a trusted source volt meter and the charger is only putting out 11.04v. Am i right in thinking that it should be higher than this as in how a car outputs at 13+volts.
The battery is sat at 10.94volts. is it time for a new charger?
The battery is sat at 10.94volts. is it time for a new charger?
#3
Depends,
If its a smart charger, it may be set to trickle charge at a lower voltage to prevent damage to the battery.
A car under load is driven by an alternator, which is a different kettle of fish to a charger.
To determine if the battery is Kaput, you need to do a load test.
it may give 12V, but sod all amps which is what you need from a battery
Mart
If its a smart charger, it may be set to trickle charge at a lower voltage to prevent damage to the battery.
A car under load is driven by an alternator, which is a different kettle of fish to a charger.
To determine if the battery is Kaput, you need to do a load test.
it may give 12V, but sod all amps which is what you need from a battery
Mart
#4
Its needs a higher voltage than the normal battery voltage when the charger is off load, or it will be unable to push any charging current into the battery. When the charger is connected you should expect to see a slightly higher voltage than 12v in this case. As the battery becomes charged its own higher voltage will reduce the output from the charger.
It is the current being delivered to the battery which charges it and the amount of current is dictated by the charger's voltage.
A motor cycle battery is not very large of course and you should use a dedicated motor cycle battery charger to avoid overcharging of the battery.
Les
It is the current being delivered to the battery which charges it and the amount of current is dictated by the charger's voltage.
A motor cycle battery is not very large of course and you should use a dedicated motor cycle battery charger to avoid overcharging of the battery.
Les
#7
Scooby Regular
iTrader: (1)
Smart chargers will charge at about 14.4v whilst replenishing the battery. Once the current demand has dropped the smart charger will hold a voltage of about 13.2-13.5volts, this prevents sulphide build up.
A good battery will generally hold a voltage of above 12.6v once charged, if your voltage is less than 12.6v then it would indicate a weak battery. Obviously a load test would also help, but not essential.
A good battery will generally hold a voltage of above 12.6v once charged, if your voltage is less than 12.6v then it would indicate a weak battery. Obviously a load test would also help, but not essential.
Thread
Thread Starter
Forum
Replies
Last Post