Chainsaws?
#1
Scooby Regular
Thread Starter
Join Date: Mar 1999
Location: Dumbartonshire
Posts: 5,896
Likes: 0
Received 0 Likes
on
0 Posts
Chainsaws?
I'm off to what all I can call is work this morning. I'm hoping to chop down a few local trees and then sell them round the scheme. Hopefully I can save some clugs, enough to keep warm for a few more days at least
Can anyone recommend a decent chain saw?
Can anyone recommend a decent chain saw?
Last edited by Jye; 24 December 2008 at 07:00 AM. Reason: And some good two stroke would help
#7
Scooby Regular
Thread Starter
Join Date: Mar 1999
Location: Dumbartonshire
Posts: 5,896
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
I bought a 99 quid one from Homebase, got p1ssed off cutting railway sleepers with a rip saw so just got in the car, got one, came back and in 2 mins it was done, Homelite or something, for what I need its great, always starts, cuts well, I dont suspect it would put up with sustained hard use but for occasional garden duty its fine, probably cheaper now.
#9
Scooby Regular
Join Date: Jul 2002
Location: Under your bonnet
Posts: 9,173
Likes: 0
Received 0 Likes
on
0 Posts
#12
Scooby Regular
Join Date: Nov 2002
Location: Talk to the hand....
Posts: 13,331
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to have to start stealing garden furniture and burning it to keep warm. Merry Christmas and thanks Gordon.
#13
#14
Scooby Regular
Thread Starter
Join Date: Mar 1999
Location: Dumbartonshire
Posts: 5,896
Likes: 0
Received 0 Likes
on
0 Posts
#15
Scooby Regular
Join Date: Mar 2007
Location: I live in Wheelock near Sandbach Cheshire.
Posts: 801
Likes: 0
Received 0 Likes
on
0 Posts
The chain tensioner is much easier to adjust.
As for stats, not got any to hand but as an ex-tree surgeon, I can say they have more torque, making them harder to stall. I also found the engine lasts longer on full power, if the mix is right.
Husky chain brakes are external as well, meaning they don't break as often as stihls.
Oh and yes, you would be crazy to use one without chaps at the very least, trousers are expensive if only an occasional user, but they have saved me on many occasions.
As for stats, not got any to hand but as an ex-tree surgeon, I can say they have more torque, making them harder to stall. I also found the engine lasts longer on full power, if the mix is right.
Husky chain brakes are external as well, meaning they don't break as often as stihls.
Oh and yes, you would be crazy to use one without chaps at the very least, trousers are expensive if only an occasional user, but they have saved me on many occasions.
#16
I bought a 99 quid one from Homebase, got p1ssed off cutting railway sleepers with a rip saw so just got in the car, got one, came back and in 2 mins it was done, Homelite or something, for what I need its great, always starts, cuts well, I dont suspect it would put up with sustained hard use but for occasional garden duty its fine, probably cheaper now.
Forget sharpening,just get new chain for about 15 quid if it gets blunt .
#18
Husky gets my vote.It was my job snedding out tree's on a piece work basis and the husky would flow better because of being abit lighter and at the end of a hard day that made alot of difference. However as mentioned above some will prefer other makes and it depends if you are using for casual or professional.
#20
be careful casually chopping down "a few local trees" you may land yourself in hot water!
also if you chop the trees down they will be green and will lead to poor burning and an increased risk of chimney fires.
also if you chop the trees down they will be green and will lead to poor burning and an increased risk of chimney fires.
#22
I have a Husky..
Used it for over 10 years now without issue.
It does only get light use really,the odd tree and weekly pallets for the wood burning stove.
Stihl are nice too..
I would look for a good deal on either,you wont go far wrong.
Used it for over 10 years now without issue.
It does only get light use really,the odd tree and weekly pallets for the wood burning stove.
Stihl are nice too..
I would look for a good deal on either,you wont go far wrong.
#23
Scooby Regular
Thread Starter
Join Date: Mar 1999
Location: Dumbartonshire
Posts: 5,896
Likes: 0
Received 0 Likes
on
0 Posts
I believe the elms will need minimal drying due to the way the disease cuts off the capillary flow at ground level. The chestnut will be slow dried at the mates foundry.
#25
I've got a multi fuel stove.With regard to chimney fires and getting the most heat from the wood, is there any that can be burnt safely/eficiently without drying for a long time?
As for the saftey gear, i wouldn't use mine without it.i know its expensive but if it saves me slipping and chopping a leg or two off then i think its worth it.
I work with a chap who's got his 'users liscence', he said the pictures he saw on the course, of injurys caused by accidents with chainsaws were pretty nasty and easily done.
As for the saftey gear, i wouldn't use mine without it.i know its expensive but if it saves me slipping and chopping a leg or two off then i think its worth it.
I work with a chap who's got his 'users liscence', he said the pictures he saw on the course, of injurys caused by accidents with chainsaws were pretty nasty and easily done.
#26
Thread
Thread Starter
Forum
Replies
Last Post