I want a metal shed.
#1
I want a metal shed.
So...where to get one from?
Are they all much alike?
Ideally I want one about 8 foot wide by 5 foot deep, height not a problem as I'm not huge.
It's to be sited on a ready-concreted area opposite the back door to house the mower, power washer, garden tools, and such like, maybe one bike.
And can anyone advise on security? It will be bolted down, water ingress underneath won't be a problem, (I'll seat it on Carafax), but what about keeping the stuff safe? My eldest is a welder/plater by trade, and we can get stuff turned or bent by various guys around town...but what? A power supply wouldn't be out of the question.
Thanks for any help.
Are they all much alike?
Ideally I want one about 8 foot wide by 5 foot deep, height not a problem as I'm not huge.
It's to be sited on a ready-concreted area opposite the back door to house the mower, power washer, garden tools, and such like, maybe one bike.
And can anyone advise on security? It will be bolted down, water ingress underneath won't be a problem, (I'll seat it on Carafax), but what about keeping the stuff safe? My eldest is a welder/plater by trade, and we can get stuff turned or bent by various guys around town...but what? A power supply wouldn't be out of the question.
Thanks for any help.
#2
Scooby Regular
Join Date: Apr 2010
Location: Birmingham
Posts: 2,482
Likes: 0
Received 0 Likes
on
0 Posts
Is there any particular reason why you are going for a metal shed and not a wood?
I had to make the same decision a couple of years ago and went for wood as it was easier to work with, modify and wood is generally warmer, doors don't get hard to open etc.
I had to make the same decision a couple of years ago and went for wood as it was easier to work with, modify and wood is generally warmer, doors don't get hard to open etc.
#3
Scooby Regular
iTrader: (8)
The plastic sheds are better but they are expensive. I think I paid £600 for an 8x8ft one about 6 years ago. Costco is the cheapest place for one.
http://www.keter.com/categories/outdoor-storage/sheds
http://www.keter.com/categories/outdoor-storage/sheds
#4
Bought mine from homebase iirc....
Like a fecking mechano set to put up
Word of advice.....most come with sh1tty plastic handles , drill a asp onto the doors.
The local rats melted my handles to get my daughters quad out , and typical of home insurance they gave me a foook off pill to swallow
Like a fecking mechano set to put up
Word of advice.....most come with sh1tty plastic handles , drill a asp onto the doors.
The local rats melted my handles to get my daughters quad out , and typical of home insurance they gave me a foook off pill to swallow
#6
Scooby Regular
iTrader: (6)
Join Date: May 2012
Location: Cardiff
Posts: 3,221
Likes: 0
Received 0 Likes
on
0 Posts
I've had a couple of metal sheds over the years Jeff, the doors were terrible tbh, especially the sliding ones. If it's only thin sheet metal then high winds have the potential to pull it apart ( lost one in bad weather that was anchored down, it just tore the metal where it was flexing and twisting ).
Would you not consider a brick one? If you know anybody who's handy at that stuff as well then it will help keep the cost down. It won't be a massive difference between the 2 imho if your gonna get a half decent metal one. Give it a flat roof with a slight pitch to let the water run off and jobs a good un
Would you not consider a brick one? If you know anybody who's handy at that stuff as well then it will help keep the cost down. It won't be a massive difference between the 2 imho if your gonna get a half decent metal one. Give it a flat roof with a slight pitch to let the water run off and jobs a good un
#7
I've never seen a plastic one, I'd be worried about people melting their way in.
Brick is too dear, I'm no bricky and to get someone to come and do it would be north of £100 including bricks.
I have to say, I've not looked at the doors closely, but they do look flimsy.
As for wind, shouldn't be a problem, sheltered on two sides, with not much space on the other two, so no high winds nearby.
Brick is too dear, I'm no bricky and to get someone to come and do it would be north of £100 including bricks.
I have to say, I've not looked at the doors closely, but they do look flimsy.
As for wind, shouldn't be a problem, sheltered on two sides, with not much space on the other two, so no high winds nearby.
Trending Topics
#8
Scooby Regular
iTrader: (5)
1 - Doors flimsy
2 - SCrews rarely line up to the pre-drilled holes so require new holes drilling.
3 - Instructions are pretty much useless.
4 - It took 3 of us (admittedly non DIY-ERS) 2 Days to complete with lots of f'ing and blinding going on...!!
Once built it was Ok. Had it over 4 years with no issues other than door hinge / clip breaking but a new one was sent and replaced.
Look quite well build on pics but panels are quite thin and 'flimsy' however does the job. I bought a 10x6 I think it was via tesco site for about £250 ish...
2 - SCrews rarely line up to the pre-drilled holes so require new holes drilling.
3 - Instructions are pretty much useless.
4 - It took 3 of us (admittedly non DIY-ERS) 2 Days to complete with lots of f'ing and blinding going on...!!
Once built it was Ok. Had it over 4 years with no issues other than door hinge / clip breaking but a new one was sent and replaced.
Look quite well build on pics but panels are quite thin and 'flimsy' however does the job. I bought a 10x6 I think it was via tesco site for about £250 ish...
#9
Scooby Regular
iTrader: (2)
I've never seen a plastic one, I'd be worried about people melting their way in.
Brick is too dear, I'm no bricky and to get someone to come and do it would be north of £100 including bricks.
I have to say, I've not looked at the doors closely, but they do look flimsy.
As for wind, shouldn't be a problem, sheltered on two sides, with not much space on the other two, so no high winds nearby.
Brick is too dear, I'm no bricky and to get someone to come and do it would be north of £100 including bricks.
I have to say, I've not looked at the doors closely, but they do look flimsy.
As for wind, shouldn't be a problem, sheltered on two sides, with not much space on the other two, so no high winds nearby.
I would think bricks alone would be around £100, let alone paying for a brickie.
#14
Had a Yardmaster tin shed for over 25 years now, It's been pretty good. I got some new door runners about 5 years ago because the old ones had seized rollers. Rang Yardmaster up, they sent some FOC.
It had originally come with a ten year warranty, no idea if that's still the case. Easy to construct, just time consuming, everything fitted correctly and nothing needed redrilling.
To be fair, it is deteriorating a bit now, but I expect probably another 5 to 10 years use out of it before I need to do something
It had originally come with a ten year warranty, no idea if that's still the case. Easy to construct, just time consuming, everything fitted correctly and nothing needed redrilling.
To be fair, it is deteriorating a bit now, but I expect probably another 5 to 10 years use out of it before I need to do something
#15
Scooby Regular
iTrader: (7)
I bought a decent wooden one about 8yrs ago to replace the dilapidated old one that was there previously, paid around £300 delivered and erected, recently replaced the felt as the roof is a little exposed to wind, apart from that it's been spot on and no sign of rot, think the mrs has given it a coat of some sort of preserver, not that it needed it mind, she just did it because she was doing the fence, she fancies herself as a bit of a painter.
Quality is the key.
Quality is the key.
#20
Scooby Regular
#21
Scooby Regular
iTrader: (8)
I looked into this a couple of years ago. I ended up getting some breeze blocks and building it myself
I got a double glazed door and window from 'freecycle' and got some OSB sheets from warehouse crates for the roof. All in it cost me about £200 and I've got walls I can actually screw shelves to too
I got a double glazed door and window from 'freecycle' and got some OSB sheets from warehouse crates for the roof. All in it cost me about £200 and I've got walls I can actually screw shelves to too
#27
Well, I CAN lay both bricks and blocks...but slowly.
A dwarf cavity wall for our conservatory took me a week....but of course, being my Mrs, it had to be five sided not including the house wall, so plenty of odd sized bricks to cut....
An 8' x 5' shed would probably take me a month, LOL.
And what about the roof?
A dwarf cavity wall for our conservatory took me a week....but of course, being my Mrs, it had to be five sided not including the house wall, so plenty of odd sized bricks to cut....
An 8' x 5' shed would probably take me a month, LOL.
And what about the roof?
#28
Scooby Regular
iTrader: (5)
Join Date: Feb 2014
Location: Cambridgeshire
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
i got a metal B&Q one, was the only one in stock and i needed it fast
its a wood veneer looking thing with a double sliding door, quite handy, door is central so ease of access etc
but putting the thing together was a pig, its only about 18 months old and undergone extensive rebuild surgery
its not very water tight either !
few bent panels already where its been hit with stuff
its a wood veneer looking thing with a double sliding door, quite handy, door is central so ease of access etc
but putting the thing together was a pig, its only about 18 months old and undergone extensive rebuild surgery
its not very water tight either !
few bent panels already where its been hit with stuff