Hirobo Freya X-Spec 90 3D carbon Heli (HUGE LOT!)
21 August 2012, 12:42 PM
#1
Hirobo Freya X-Spec 90 3D carbon Heli (HUGE LOT!)
Hirobo Freya X-Spec. Approx 4 hours flight
All X-Spec upgrades inc
Full original Hirobo ECCPM setup with metal head upgrade
Full carbon airframe
Full carbon push/pull upgrade
Delrin gears
Carbon fin set
Carbon pushrods
3D header tank setup
Nicad pack with battery level indicator
OS91 C-Spec engine - perfect tune and well serviced with low hours - The O.S. .91 C-spec engine was selected to provide the heli with plenty of power. The O.S. .91 was released in a more powerful version with a built-in fuel pump to supply fuel in a steady flow under all conditions. The engine produced 3.1 horsepower at 15,000 rpm, and it has proven an extremely powerful and reliable performer.
Curtis Youngblood MP2 – Probably the best and most powerful pipe available for a 90 motor
Futaba GY-601 Gyro with matching S-9251 digital servo - Probably the finest helicopter gyro available, the Futaba GY-601 was designed for FAI competition flying, and has both FAI and 3D flying modes. The gyro can be operated in either normal or heading hold mode, with a high number of user adjustable parameters in order to match the gyro to your helicopter and your preferred flight profile
Futaba FF9 (II) Transmitter – Beautiful revised version of the original FF9. Only used to fly on my PC simulator so in as new condition.
All servos are Futaba 9252 digitals. These are some of the finest servos you can buy and all with very low hours. RX is Futaba 149.
SAB 680 carbon main blades, stock X-Spec tails
Revlock 10 Guvernor
Brand new Sullivan Dynatron Starter
Brand new Robbie “one-way” starting wand
Brand new flight case
Brand new Fuel pump
Brand new fuel fittings for fuel bottle
Brand new ball cup pliers
Phoenic RC simulator with Futaba dongle, ready to go.
Spares inc Full spare carbon X-Spec airframe, Original Hirobo canopy, Ally CCPM rotorhead, Spare Youngblood MP2 (Small dent in it), delrin gears, finsets, graphics, … lots more inc too.
All parts supplied by Bob at Skyline Models
This model heli is a stunning spec and anyone that knows helis knows how good this is. Yes there are cheaper out there but none will come close to the Hirobo quality.
Heli is available to view in Essex and there is way too much to list completely and photgraph. Anyone who knows 3D Helis knows what this is and what a serious piece of kit it is.
This stands me in thousands and am looking for £900 for the lot.
Cheers,
Frayz
All X-Spec upgrades inc
Full original Hirobo ECCPM setup with metal head upgrade
Full carbon airframe
Full carbon push/pull upgrade
Delrin gears
Carbon fin set
Carbon pushrods
3D header tank setup
Nicad pack with battery level indicator
OS91 C-Spec engine - perfect tune and well serviced with low hours - The O.S. .91 C-spec engine was selected to provide the heli with plenty of power. The O.S. .91 was released in a more powerful version with a built-in fuel pump to supply fuel in a steady flow under all conditions. The engine produced 3.1 horsepower at 15,000 rpm, and it has proven an extremely powerful and reliable performer.
Curtis Youngblood MP2 – Probably the best and most powerful pipe available for a 90 motor
Futaba GY-601 Gyro with matching S-9251 digital servo - Probably the finest helicopter gyro available, the Futaba GY-601 was designed for FAI competition flying, and has both FAI and 3D flying modes. The gyro can be operated in either normal or heading hold mode, with a high number of user adjustable parameters in order to match the gyro to your helicopter and your preferred flight profile
Futaba FF9 (II) Transmitter – Beautiful revised version of the original FF9. Only used to fly on my PC simulator so in as new condition.
All servos are Futaba 9252 digitals. These are some of the finest servos you can buy and all with very low hours. RX is Futaba 149.
SAB 680 carbon main blades, stock X-Spec tails
Revlock 10 Guvernor
Brand new Sullivan Dynatron Starter
Brand new Robbie “one-way” starting wand
Brand new flight case
Brand new Fuel pump
Brand new fuel fittings for fuel bottle
Brand new ball cup pliers
Phoenic RC simulator with Futaba dongle, ready to go.
Spares inc Full spare carbon X-Spec airframe, Original Hirobo canopy, Ally CCPM rotorhead, Spare Youngblood MP2 (Small dent in it), delrin gears, finsets, graphics, … lots more inc too.
All parts supplied by Bob at Skyline Models
This model heli is a stunning spec and anyone that knows helis knows how good this is. Yes there are cheaper out there but none will come close to the Hirobo quality.
Heli is available to view in Essex and there is way too much to list completely and photgraph. Anyone who knows 3D Helis knows what this is and what a serious piece of kit it is.
This stands me in thousands and am looking for £900 for the lot.
Cheers,
Frayz
Last edited by frayz; 21 August 2012 at 12:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM
