'08 to '10/11 Hatch Bumper Swap
#1
Scooby Regular
Thread Starter
Join Date: Jun 2011
Location: The North
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
'08 to '10/11 Hatch Bumper Swap
Have unfortunately scuffed the front bumper of the car. Not much, but enought to get me thinking about swapping the front bumper for the facelifted one from the 2010/2011 hatch.
My question is, has anyone done it? Does anyone know what parts are required? I remember reading somewhere that you need to swap the bumper, grille and fog covers. Anything else?
I did call my SG Petch up in Richmond but they were unsure on what was needed. For the 2010/2011 model, is the bumper the same on both the hatch and the saloon?
Any help or advice, as always, is muchly appreciated.
My question is, has anyone done it? Does anyone know what parts are required? I remember reading somewhere that you need to swap the bumper, grille and fog covers. Anything else?
I did call my SG Petch up in Richmond but they were unsure on what was needed. For the 2010/2011 model, is the bumper the same on both the hatch and the saloon?
Any help or advice, as always, is muchly appreciated.
#4
I was thinking of doing it to the R205, but decided not to.
Some pics of the new face lift
https://www.scoobynet.com/763923-08-...elves-210.html
Some pics of the new face lift
https://www.scoobynet.com/763923-08-...elves-210.html
Last edited by juggers; 17 October 2011 at 10:55 PM.
#6
Trending Topics
#10
Scooby Regular
iTrader: (3)
Join Date: Oct 2008
Location: Hilltop
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Nope nothing bad just hit a cone on the straight after a quick bend. It removed some paint and the side air duct. The bumper was already cracked before i bought it & never noticed until after the sale.
The set up you have on your front end is way way nicer than the horrid black effort on mine. Glad Subaru changed it TBH and utterly transforms the front.
Notice the missing vent!
The set up you have on your front end is way way nicer than the horrid black effort on mine. Glad Subaru changed it TBH and utterly transforms the front.
Notice the missing vent!
#11
[QUOTE=StrikE;10289024]Nope nothing bad just hit a cone on the straight after a quick bend. It removed some paint and the side air duct. The bumper was already cracked before i bought it & never noticed until after the sale.
The set up you have on your front end is way way nicer than the horrid black effort on mine. Glad Subaru changed it TBH and utterly transforms the front.
Notice the missing vent!
The MY08+ is to plasticky for my liking to. The best fix is to spray the foglight surrounds black like the STI Cosworth. Looks much better.
Immy
The set up you have on your front end is way way nicer than the horrid black effort on mine. Glad Subaru changed it TBH and utterly transforms the front.
Notice the missing vent!
The MY08+ is to plasticky for my liking to. The best fix is to spray the foglight surrounds black like the STI Cosworth. Looks much better.
Immy
#12
Scooby Regular
Thread Starter
Join Date: Jun 2011
Location: The North
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Can someone provide a list of part numbers for the following bits as I'm very close to getting this done. =D
Bumper assy
Front grille assy
Fog Covers LH & RH
wheel arch liners LH & RH
Washer jet covers LH & RH
Cheers in advance.
Bumper assy
Front grille assy
Fog Covers LH & RH
wheel arch liners LH & RH
Washer jet covers LH & RH
Cheers in advance.
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM