My V4 Type R, carbon, bronze and 2.3 :)
16 November 2010, 11:15 AM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: May 2006
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
My V4 Type R, carbon, bronze and 2.3 :)
Heres my V4 Type R, had her for 2 years no, awesome car.
Engine
EJ22 CDB(Closed Deck Block) using a 2.5 crankshaft i believe to achieve 2.3 litres. Engine was bought from a chap on scoobynet who was quite close to me. His final bill for the engine build was 5900, he then decided to break the car as he had kids on the way (i think). My original plan was to 'build' the original EJ20 engine but buying this made more sense financially and it saved me a bit of time.
Closed deck EJ22 block
SCAT H Beam Con rods
ARP Big end bolts
Wiseco Pistons (2.33)
ACL race bearings (main and big end)
New oil pump, water pump and oil modine (OEM)
ARP Group N Uprated Head stud and nut kit.
Heads fully overhauled and reshimmed
New valve stem seals and cam seals
All engine block seals replaced.
Fuel labs FPR
Speedflow -6N stainless braided lines and fittings to allow parallel fuel lines.
550cc Injectors
Alloy fuel rails
TD05 20G turbo
Magnex decat down pipe
H&S Centre section
Ninja 2 back box
HKS FMIC
Apexi Induction kit
Full STi Group N engine mount set
Walbro 255 l/ph fuel pump
Apexi power FC ECU and hand commander
Chassis
BC BR series coilovers
Whiteline rear anti roll bar drop links.
AP 355mm 6 pot Brakes
DS2500 pads
Inovit STV-1 wheels in bronze
Rays alloy wheel nuts (taken back from Japan by my bare hands)
Custom centre caps
STi rear trailing arms (taken back from Japan by my bare hands).
Exterior
Seibon Carbon fibre Bonnet vent
Carbon fibre rear spoiler
Carbon fibre small bonnet scoop
Facelift front bumper (cut to fit FMIC)
HT Autos V-ltd front splitter wrapped in 3M Carbon vinyl
Roof wrapped in 3M Carbon Vinyl
OEM Type R stickers re applied to the rear quarters
Various stickers
Newera imports rear tow hook
Interior
Recaro Speed reclining buckets seats
Luke 4 point harness
OMP suede steering wheel
D1 snap off steering wheel boss
HKB steering wheel boss kit
Carbon vinyl wrapped ash tray
STi Gear ****
Stepper gauges (boost, oil temp and oil pressure).
Here she is
Small video too -
For anyone thats interested the cars actually up for sale, if you want to know more then pop me a PM
Engine
EJ22 CDB(Closed Deck Block) using a 2.5 crankshaft i believe to achieve 2.3 litres. Engine was bought from a chap on scoobynet who was quite close to me. His final bill for the engine build was 5900, he then decided to break the car as he had kids on the way (i think). My original plan was to 'build' the original EJ20 engine but buying this made more sense financially and it saved me a bit of time.
Closed deck EJ22 block
SCAT H Beam Con rods
ARP Big end bolts
Wiseco Pistons (2.33)
ACL race bearings (main and big end)
New oil pump, water pump and oil modine (OEM)
ARP Group N Uprated Head stud and nut kit.
Heads fully overhauled and reshimmed
New valve stem seals and cam seals
All engine block seals replaced.
Fuel labs FPR
Speedflow -6N stainless braided lines and fittings to allow parallel fuel lines.
550cc Injectors
Alloy fuel rails
TD05 20G turbo
Magnex decat down pipe
H&S Centre section
Ninja 2 back box
HKS FMIC
Apexi Induction kit
Full STi Group N engine mount set
Walbro 255 l/ph fuel pump
Apexi power FC ECU and hand commander
Chassis
BC BR series coilovers
Whiteline rear anti roll bar drop links.
AP 355mm 6 pot Brakes
DS2500 pads
Inovit STV-1 wheels in bronze
Rays alloy wheel nuts (taken back from Japan by my bare hands)
Custom centre caps
STi rear trailing arms (taken back from Japan by my bare hands).
Exterior
Seibon Carbon fibre Bonnet vent
Carbon fibre rear spoiler
Carbon fibre small bonnet scoop
Facelift front bumper (cut to fit FMIC)
HT Autos V-ltd front splitter wrapped in 3M Carbon vinyl
Roof wrapped in 3M Carbon Vinyl
OEM Type R stickers re applied to the rear quarters
Various stickers
Newera imports rear tow hook
Interior
Recaro Speed reclining buckets seats
Luke 4 point harness
OMP suede steering wheel
D1 snap off steering wheel boss
HKB steering wheel boss kit
Carbon vinyl wrapped ash tray
STi Gear ****
Stepper gauges (boost, oil temp and oil pressure).
Here she is
Small video too -
For anyone thats interested the cars actually up for sale, if you want to know more then pop me a PM
Trending Topics
Good spec too
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM
