oli_w

gunna replace my bailey with a hks but as its completely different the lil hole my bailey sits in looks too tiny, where have ppl mounted them?

Matt241

Here is a pic of mine, Sounds the Bollox

oli_w

matt how have u got it connected as i found the angle that the pipe u connect the valve too is real awkward

Matt241

It had a bailey Dv 26 already fitted when I purchased the car including the blanking plug and the pipe work, I just took the Dv26 off and replaced it with this one, I could do ideally with moving it as its right above the Hot Turbo.

Here is another pic so you can just see the pipe work, Ignore the cable ties that is just to stop it moving around.

oli_w

thanks a lot for that mate! i was spendin hours tryin to work out why u have more space, urs a uk scoob? coz mine has the cold air turbo feed jobby where u have ur dv. h is the blue pipe connected to ur dv? the bottom of mine just has a hole into it which is a bit useless

Matt241

Mine is an Import, The dump valve connects to the blue pipe just by pushing it into the pipe and then a clip to tighten it the pipes are different sizes hence the amount of connection pipes and joiners.

Matt.

oli_w

this is the bottom of mine, just a hole as there is no fitting kit and i really dunno how i can attach it, any suggestions at all?

wrighty338

iTrader: (33)

urm...your missing a bit?

finalzero

Here's mine:

Slick81

iTrader: (1)

Is that all you got?

Your missing the fitting kit which attaches to the bottom via a cir-clip. Try ringing Sumo Power and they should be able to source the kit for you. However, when I rang them they said that they are very hard to get hold of. I did find it on Ebay but cant remember the site now, so mite be worth looking there. Was selling for about £30 approx including delivery. Other option is to do what I did. I got the new version which came with the flange to fit MY99 onwards. I just cut the bottom part of the flange off and fitted it to my intercooler pipe where the old DV was. One hose clip later and its perfectly fine

If that flange is easier to get a hold of and cheaper then you could try that.

Daft Lad

Here's mine if its any help

Slick81

iTrader: (1)

Heres mine

Yes...my engine bay is filthy

[IMG][/IMG]

WRX-DAN

how much are these and where can i get one from? they sound awesome!

oli_w

u can get the hks ssqv ( just the newer version ) on most scooby sites, scoobyworld has them for around £250, think thats the best price i have seen, if not , ebay has them for sale. i might be selling this one as i have just purchased one with a fitting kit off a mate. spoke to sumopower n u cant get the fitting kits seperate but they do supply some fitments to make ur own fitting kit