Damocell

iTrader: (1)

Pic of STI Newage Brembos on a classic, with the wheels on. Can you please metion the size of the wheels and whether or not a spacer was required to get them to fit.

Damo

turboDean

iTrader: (4)

18" PFF7 replicas, no spacer required.

mattp11

Hello,

Pics you request.

http://i142.photobucket.com/albums/r...y/IMG_0574.jpg
http://i142.photobucket.com/albums/r...y/IMG_0539.jpg

These are genuine P1 wheels , had trouble with spokes fouling the calipers due to the extra width so made some 9mm spacers out of alluminium.
Cheers Matt

Scoobyslammed

MY98 STi type R... 18inch Prodrive reps... fitted with 3mm spacers on each corner to bring the wheels out just slightly...
The wheels clear the Brembos by miles...





This pic was took when the engine was out... hence alittle high on the front...

Multijfj

That car is stunning. absolutly mint

Scott.T

iTrader: (2)

Prodrive 8 x 18 PFF7 ET51 No spcers require

FRONT


REAR


They won't fit behind Prodrive P-WRC 7.5 x 18 ET53 (P1 Style Alloys), as I tried.

Scoobyslammed

Cheers...

Damocell

iTrader: (1)

Isn't it dangerous to have spacers that big??? Did you have to get longer bolts?

Damo

DannyBoy007

iTrader: (7)

Heres mine,
Copying the trend of Pff7's replicas, I used these as I knew they would fit over brembo's and they are easier to clean:



And no I don't normally hang around Mcdonalds, we just happened to use it as a meeting piont one day



I used standard discs that I had grooved to match my rears

cmpequeno

sorry for hijacking, the brembo calipers are a bolt on mod? thanks

turboDean

iTrader: (4)

Fronts bolt straight on, backs can be done but require some mods to do so, for more info check out Scott.T thread:
https://www.scoobynet.com/projects-4...d-brembos.html

cmpequeno

thanks, at front we just need to use discs for the classic but with the sti diameter right? thanks again

turboDean

iTrader: (4)

Use the Newage STI Disks, the 2001-2004 go straight on, 2005 on would need re-drilling to the correct PCD.

cmpequeno

ok, thanks

mattp11

Hi,
Quote:
Isn't it dangerous to have spacers that big??? Did you have to get longer bolts?

Damo


Yeah longer bolts were needed easy job knock the old ones out then pull the new ones in with a selection of washers and the original nut, then cut to length.
Cheers Matt

Wagon Wheels

This is my first posting on Scoobynet. Yes, you can fit the Brembo 4 pot callipers to the Classic model with 17" wheels. I used the 330 mm discs, calipers and braided lines on my 1996 WRX Wagon and what a difference! I have just replaced the standard Bremo pads wth EBC red dot. These have more bite and better for fast road use of track days. Hope this helps. Alex.

Trickie

I also got these brakes on my bug eye with longer studs and 10mm spacers
info for those that might like to try it

jukebox

How much were the longer studs and spacers.

Trickie

sorry i do not no i got them with the brembos,

i think about 50.00 for the lot have a look about because there realy worth the extra work

alanbell

iTrader: (6)