carbon dipped dash trim
#1
carbon dipped dash trim
I sent my dash panel trim off to have them carbon dipped,I was after the subaru carbon dash kit,but unfortunately,i am a tight git,so no way was i paying £250 for a few bits of plastic!!!
Anyway,i used a company through my local halfords ripspeed X store,the trim was away for two weeks and returned looking superb
Total cost was £35 plus vat and courier costs so just under £60
What ya think
Anyway,i used a company through my local halfords ripspeed X store,the trim was away for two weeks and returned looking superb
Total cost was £35 plus vat and courier costs so just under £60
What ya think
#2
Scooby Regular
Join Date: May 2003
Location: Nottingham
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Looks great m8 good value for money.....apologies I missed you at NBO was called into work so gutted. I am going to Thorseby tho so I hope to have a closer look then if your there.
Again looks really good.
Ash
Again looks really good.
Ash
#5
Originally Posted by alloy
mmmm looking
Ripspeed X you say?
Ripspeed X you say?
Trending Topics
#8
Originally Posted by dazzr1
hello mate looks pretty sweet, was it the gateshead store that did it for you?checked there website but it doesnt mention when or where any others will be opening
i had it done through the sheffield store on guernsey road.TBH i was a little concerned about the finished product,but i was really happy when it was returned to me,really good finish
#11
Originally Posted by vindaloo
Would be useful to know what company did the work and whether they can do "other" effects and finishes.
Looks like a flipping bargain!
J.
Looks like a flipping bargain!
J.
obviously,halfords are taking a cut on top of the price charged
But earlier,when i dropped the forester pocket and door handles in,i sneaked a peak in there diary and its a company called Ashford international ltd based in middlesex
so if anyone lives in the area and knows of them or can get there contact details,group buys galore
also,they do other finish's,carbon(loads of colours)chrome/alloy/flip paint style/wood effect etc
#15
Scooby Regular
Join Date: Apr 2006
Location: Newmarket
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
#16
Originally Posted by Alg
#18
Originally Posted by scooter(WRX03 PPP)
Sorry for asking this, but how the hell do you get the damn panels off? I'm a bit scared at ruining the plastic.
ok matey
1-open the drinks holder and remove the two screws holding it in place
2-pull this out,this will free up space for your fingers to pull at the top edge of the stereo/air con surround panel,this will pop free as it is fitted with four pop plugs
3-the top air vent unit is removed the same way as the stereo surround,give it a decent pull and out it comes
4-small round air vents,use a kitchen knife to just prize at one side and it will pop out
when you have removed all the panels,just unscrew the aircon unit away from the stereo surround,and same with the top middle air vents
hope this helps
mark
#20
Originally Posted by wrx300scooby
It looks great Will have a proper look at Thoresby if that's OK Ethanrob?
i should also have the forester pocket and door handles done and back fitted by then
#21
#22
Scooby Regular
Join Date: May 2006
Location: Manchester
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ethanrob
ok matey
1-open the drinks holder and remove the two screws holding it in place
2-pull this out,this will free up space for your fingers to pull at the top edge of the stereo/air con surround panel,this will pop free as it is fitted with four pop plugs
3-the top air vent unit is removed the same way as the stereo surround,give it a decent pull and out it comes
4-small round air vents,use a kitchen knife to just prize at one side and it will pop out
when you have removed all the panels,just unscrew the aircon unit away from the stereo surround,and same with the top middle air vents
hope this helps
mark
1-open the drinks holder and remove the two screws holding it in place
2-pull this out,this will free up space for your fingers to pull at the top edge of the stereo/air con surround panel,this will pop free as it is fitted with four pop plugs
3-the top air vent unit is removed the same way as the stereo surround,give it a decent pull and out it comes
4-small round air vents,use a kitchen knife to just prize at one side and it will pop out
when you have removed all the panels,just unscrew the aircon unit away from the stereo surround,and same with the top middle air vents
hope this helps
mark
#24
Scooby Regular
Join Date: Oct 2002
Location: At Home
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dave Bullock
Liking the Carbon and Kevlar look the best I think.
#25
FTD-Technics is here Guys
Hi All, Well Th eproduct is here in the U.K
Its On EBAY here:-
CARBON INTERIOR FILM, DASH COVER ETC on eBay, also Dial, Dash Switch Custom'n, Interior Styling, Car Tuning Styling, Cars, Parts Vehicles (end time 05-May-08 20:41:35 BST)
Regards,
Simon FTD-Technics
Its On EBAY here:-
CARBON INTERIOR FILM, DASH COVER ETC on eBay, also Dial, Dash Switch Custom'n, Interior Styling, Car Tuning Styling, Cars, Parts Vehicles (end time 05-May-08 20:41:35 BST)
Regards,
Simon FTD-Technics
#28