micky boy

iTrader: (10)

hi all, i am wondering if there is anybody out there with a hawkeye 2006/7 with electric folding mirrors ?
i am in desperate need of the part number from one as i do not have one and subaru want to know the ins and out of a ducks _ _ s for me to get one.
the issue is i bought the electric mirrors from on here a while ago but they are from a earlier car and the switch is near the handbrake but on the hawkeyes it is on the door near the electric window switches.

any help would be gratefuly aprreciated

cheers mickyboy

daz1968

iTrader: (13)

The plate is different on the door as well to fit the switch, try Jap performance parts they will probably have some in as is a jdm only part. My my05 is the same so you could get from any widetrack jdm car

micky boy

iTrader: (10)

ok nice 1 mate have called them and they are going to get back to me.

cheers mickyboy

tubbytommy

iTrader: (20)

I did an 05 conversion on my blob and fitted door cards and folding mirrors from a jap sti hawkeye.
I got all the parts from jap performance parts.
If you have no luck pm me and ill give you the part no from my folding mirror door switch.

micky boy

iTrader: (10)

tubby tommy, appreciate you getting back to me.
i will wait for a call from them tommorow and go from there, im assuming all the wiring is the same as i have taken my original switch out and looks like a few wires are not being used which was the same case for my old p1, i just plugged in new switch and they worked fine ?

cheers mickyboy

tubbytommy

iTrader: (20)

i did the full conversion from early blob where the switch was near the gearstick and i relocated the switch to the door and fitted folding mirrors.
you need to run two extra wires from the switch to each door to activate the mirrors.
you can connect the wires in the multi block in the footwell so dont need to run them into the doors.
i can tell you the colours in the multiblock to connect to if you need that info.
its a simple job if you need any help or info pm me.
it took me ages to figure it out and i had to download wiring diagrams etc.

tubbytommy

iTrader: (20)

the jap swith will plug straight in to your door, there will be spaces underneath for 4 wire to plug into, these are the ones to activate the folding part.
two to each multi block in the door.
get the switch and pm me and ill tell you how to wire up with pics if you wish

micky boy

iTrader: (10)

ok realy apreciate your help on this, i may need the part number of the plastic trim it fits into aswell, i see that you can unscrew the electric window switches and just screws them into new holder.

cheers mickyboy

micky boy

iTrader: (10)

is there anybody out there who can help me with this problem ?

cheers mickyboy