Superslim HID install problem
06 February 2009, 03:05 PM
#1
Scooby Newbie
Thread Starter
Join Date: Sep 2005
Location: Tring
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Superslim HID install problem
I have just installed the first of my new HID main beam bulbs on my 04 JDM blobeye but they do not work. I have tried both ballasts and both bulbs.
I have seen in other threads suggestions about reversing the polarity. But as the wiring is plug and play, and idiot proof, I can see no way of reversing the polarity as the connections will ony connect one way.
Any help appreciated.
I have seen in other threads suggestions about reversing the polarity. But as the wiring is plug and play, and idiot proof, I can see no way of reversing the polarity as the connections will ony connect one way.
Any help appreciated.
06 February 2009, 04:26 PM
#3
Scooby Newbie
Thread Starter
Join Date: Sep 2005
Location: Tring
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
As suspected, it was a polarity issue. Bob to the rescue, you have to reverse the connector coming in from the cars origianl wiring loom. Then all OK.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM