Push Button Start
I can't see it being hard as lomg as you can find somehwere to mount the start button. Are you thinking of souricing a proper start button like that from a Honda S2000?
If you can mount it I reckon you just need to alter the wiring from the ignition switch for the last positon - the starter motor engage and re-route to the button. Shouldn;t be to hard to do.
Means you turn your ignotion key to running and press the button and off you go. The key would still turn to the last position of course but wouldn't do anything.
If you can mount it I reckon you just need to alter the wiring from the ignition switch for the last positon - the starter motor engage and re-route to the button. Shouldn;t be to hard to do.
Means you turn your ignotion key to running and press the button and off you go. The key would still turn to the last position of course but wouldn't do anything.
Guest
Posts: n/a
Cheers dude
I still have the s2000 button from my Focus
It had the s2000 button on it so i took it off an put my standard one that came with the kit just before i sold it
Im ****e at wiring tho so i was hoping someone could give me a bit of instruction then me n my mate could do it :-) the kit somes with instructions but i would like it if a fellow Scooby owner had done it - I know a lad with a scooby that has it but he is never about anymore havent seen him in ages
His is mounted on the console where the handbrake is
I still have the s2000 button from my Focus
It had the s2000 button on it so i took it off an put my standard one that came with the kit just before i sold it
Im ****e at wiring tho so i was hoping someone could give me a bit of instruction then me n my mate could do it :-) the kit somes with instructions but i would like it if a fellow Scooby owner had done it - I know a lad with a scooby that has it but he is never about anymore havent seen him in ages
His is mounted on the console where the handbrake is
Last edited by Connor_scotland; Jan 7, 2009 at 12:23 PM.
I'm like you, not to good with wiring! I bought the Zerosports kit, plug and play and it comes with its own OE style button. Had it in now for a couple of years, works well and looks OE
S!
S!
On the opposite side of the ignition is that "hub" of soldered wires. Tap into the wires at the 5 o'clock (black/yellow) and 7 o'clock (black). Put momentary button in between. The button will fire the engine when the key is at 'ON' position. Cranking the key will also work.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
