Headlamp bulb upgrade for MY01?
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2001
Location: Cheshire
Posts: 2,895
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone recommend what uprated bulbs are best to put in my headlamps instead of the standard bulbs? The lights at night,aren't the best in the world......
Also,Any links where to get them from greatly appreciated?
Finally,are they easy to install yourself and if so,how?
Cheers guys!
Nick..
Also,Any links where to get them from greatly appreciated?
Finally,are they easy to install yourself and if so,how?
Cheers guys!
Nick..
#2
Scooby Regular
Join Date: Mar 2001
Location: Glos UK. - Manufacturers of ECU Data Monitors.
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
Before i changed to morettes i had PIAA bulbs in my MY01,
I bought then from D R Motorsport as a pack together with brighter sidelight bulbs, cost was around £50-60, i had them fitted during a service so not sure how easy they are to put in.
simon
I bought then from D R Motorsport as a pack together with brighter sidelight bulbs, cost was around £50-60, i had them fitted during a service so not sure how easy they are to put in.
simon
#3
Just put Phillips Vision Plus & Blue vision sidelights in mine. Much brighter and whiter. very easy to fit. Get them from powerbulbs.com. You need H4's and they cost £19.50 plus you get the sidelights free. Bargain.
#4
#5
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2001
Location: Cheshire
Posts: 2,895
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the help guys!!!!
I've just ordered the Philips Vision plus from Powerbulbs and as DT says you get the free sidelights.Bargain if you ask me!
Cheers,
Nick..
I've just ordered the Philips Vision plus from Powerbulbs and as DT says you get the free sidelights.Bargain if you ask me!
Cheers,
Nick..
#7
Have you looked in you hand book???
Main lights are access by squeezing the rubber holder & protector at the back of the light and pulling out. Note this requires a big squeeze and a big tug!! Ohh er
The sidelights are harder to get at but easier to fit. I fitted mine with the lights removed (cos I painted the light innards) so it was east. A quarter turn on the grey holder and they pull out. Having looked at where they are with the lights in..... prepare to lose some skin off your knuckles!!!
Might be easier to remove the lights which is a simple job. See here for details http://www.scoobymods.com/mods/wrx/clearlight.php
Main lights are access by squeezing the rubber holder & protector at the back of the light and pulling out. Note this requires a big squeeze and a big tug!! Ohh er
The sidelights are harder to get at but easier to fit. I fitted mine with the lights removed (cos I painted the light innards) so it was east. A quarter turn on the grey holder and they pull out. Having looked at where they are with the lights in..... prepare to lose some skin off your knuckles!!!
Might be easier to remove the lights which is a simple job. See here for details http://www.scoobymods.com/mods/wrx/clearlight.php
Trending Topics
#8
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2001
Location: Cheshire
Posts: 2,895
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the help DT!!!!
As to reading the handbook.Nah,you know how it is!
If all else fails - RTFM (Read the ******* manual )
I'll hopefully be trying this on wednesday night!
Cheers,
Nick..
As to reading the handbook.Nah,you know how it is!
If all else fails - RTFM (Read the ******* manual )
I'll hopefully be trying this on wednesday night!
Cheers,
Nick..
#9
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2001
Location: Cheshire
Posts: 2,895
Likes: 0
Received 0 Likes
on
0 Posts
Well,Some advice for those thinking of changing/upgrading head/side lamp bulbs on the MY01........
I found it easier (As others have said!) to actually remove the front grille and vents next to headlamps and then unbolt the three 10mm bolts holding the headlights onto the car and totally remove the headlamp units and change the bulbs with the units off the car.Instead of struggling removing the wiring connectors firstly, undo the unit and then pull it out as far as you can.You then gain better access to the connectors.I'm no whizzkid when it comes to fixing cars (Computers is my game!!! ) so if I can do it,then anyone can!
Cheers,
Nick..
I found it easier (As others have said!) to actually remove the front grille and vents next to headlamps and then unbolt the three 10mm bolts holding the headlights onto the car and totally remove the headlamp units and change the bulbs with the units off the car.Instead of struggling removing the wiring connectors firstly, undo the unit and then pull it out as far as you can.You then gain better access to the connectors.I'm no whizzkid when it comes to fixing cars (Computers is my game!!! ) so if I can do it,then anyone can!
Cheers,
Nick..
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM
jonnyboy82
Lighting and Other Electrical
0
29 September 2015 01:59 PM