richie0210

Iv just purchesed some morette head lights for my 2001 bugeye.
Iv 90 percent fitted them but there some wires i have no idea what to do with.There was three main connectors which seemed to just plug in but im left with anoth couple of wires. i brought these second hand and have no instructions or clue, any help would be appreciated cheers guys

nas sti

is it a sti or wrx

Old Farquar

Here's some instructions Bugeye Morette fitting I've PM'd you some contact details that could help

richie0210

cheers guys its a wrx wagon

richie0210

cheers for those instructions, but im still well and truley in the dark thanks for the other contact details ill give them ago

Old Farquar

Think I know which ones you mean now. There are a couple of spade connectors on wires from the sidelight area, these link between both sets of headlights if you get what I mean. I'm not sure why they're needed, but mine are connected to a pair of cables that run behind the grille panel

richie0210

that might be the ones.i really cant work it out the left light has an extra wire compared to the right hand one.the lights all work except the main beam.normally most things can be worked out with a bit of thought but this has me completly stumped.ill def try linking them tho thankyou

_Meridian_

iTrader: (1)

One wire on the passenger side is an extra earth which you attach to the battery 0V terminal. It should have an open spade on the end IIRC.


M

richie0210

wires had been cut by previous owner, so one set to connect the lights up together and one to the battery terminal to act as a earth. ill have ago when i get five mins cheers again guys hopefully that will sort the problems out