two plugs I am trying to identify on a 93WRX loom
#1
Scooby Regular
Thread Starter
Join Date: Nov 2003
Location: Hampshire
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
two plugs I am trying to identify on a 93WRX loom
I have two plugs I am trying to identify on a 93WRX loom.
I am stripping the loom down to install in my kit/replica, and cannot identify two plugs
1> Blue 2 pin plug with a Green with black stripe wire and a Black with red stripe wire.
The Green with black goes to pin 11 on connector C the 16pin one on the ECU. But it is not shown that I can see on the wiring diagrams
Any ideas? Looks like it may be under the dash?
2> Dark grey 2 pin plug that looks to be under bonnet. One side has a Red with yellow stripe wire, the other is to ground
The connector is a flat side oval so to speak
I am stripping the loom down to install in my kit/replica, and cannot identify two plugs
1> Blue 2 pin plug with a Green with black stripe wire and a Black with red stripe wire.
The Green with black goes to pin 11 on connector C the 16pin one on the ECU. But it is not shown that I can see on the wiring diagrams
Any ideas? Looks like it may be under the dash?
2> Dark grey 2 pin plug that looks to be under bonnet. One side has a Red with yellow stripe wire, the other is to ground
The connector is a flat side oval so to speak
Last edited by Spyder550; 18 March 2007 at 01:56 PM. Reason: include photos
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM