HKS Turbo Timer
#4
do you mean the patch loom that fits in between the ignitin barrel harness and wiring loom on the car and the plug off of the turbo timer should be a three pin job and normally the two wires you mention one is a earth and the other is a feed from the hand brake switch wire which kills the engine if the hand brake is released but they should be both earths
#5
I have the patch loom which you conect to the blue ignition plug of which there is Red, White, Blue and Yellow wires running between the 2 plugs on the patch loom.
There is a Red Wire Crimped to the Blue wire on the patch loom which runs to another 4 pin plug.
That plug im strugling to find out where it goes.
There is that Red wire from the patch loom, A black which i know is earth and another Black and Brown wire which are both taped together so must go to soming close to each other.
Hear are some pics.
There is a Red Wire Crimped to the Blue wire on the patch loom which runs to another 4 pin plug.
That plug im strugling to find out where it goes.
There is that Red wire from the patch loom, A black which i know is earth and another Black and Brown wire which are both taped together so must go to soming close to each other.
Hear are some pics.
Thread
Thread Starter
Forum
Replies
Last Post