Electric Windows
#1
Electric Windows
Hi,
All of a sudden all of my windows have stopped working (its not the lock switch!), the fuse box under the dash doesnt have a cover so I cant find what fuse would be the one for controling it (none of the fuses seem to have blown).
Could someone suggest the issue and which fuse I need to look at.
Cheers!
All of a sudden all of my windows have stopped working (its not the lock switch!), the fuse box under the dash doesnt have a cover so I cant find what fuse would be the one for controling it (none of the fuses seem to have blown).
Could someone suggest the issue and which fuse I need to look at.
Cheers!
Last edited by tronlc; 28 February 2007 at 04:53 PM.
#3
Ok the plot thickens!
I removed the electric window switch unit from the drivers door. I checked the + and - feed to it and they are live and neg...
I then dismantled the abs casing from the circuit board and found the 8 outputs to the motors ie fru frd etc.
I then plugged the board back into the connector and operated a switch, the strange thing is it appeard to make some of the outputs live including the correct one ie fru. I then disconnected the plug to the motor and put a + to either of the wires but the motor didnt move.....
HELP!!!
I removed the electric window switch unit from the drivers door. I checked the + and - feed to it and they are live and neg...
I then dismantled the abs casing from the circuit board and found the 8 outputs to the motors ie fru frd etc.
I then plugged the board back into the connector and operated a switch, the strange thing is it appeard to make some of the outputs live including the correct one ie fru. I then disconnected the plug to the motor and put a + to either of the wires but the motor didnt move.....
HELP!!!
Last edited by tronlc; 02 March 2007 at 04:51 PM. Reason: incorrect entry
#4
Ok.. have taken off the drivers motor...
Cant get it to work, has anyone heard of all 4 motors blowing at the same time?? Perhaps something happened to the switch and has done something to all 4 motors?!??!
There must be someone out there who knows!!!
Can anyone conifrm that earthing the motor body then putting + to one of the terminals should make the motor work....
Cheers
Cant get it to work, has anyone heard of all 4 motors blowing at the same time?? Perhaps something happened to the switch and has done something to all 4 motors?!??!
There must be someone out there who knows!!!
Can anyone conifrm that earthing the motor body then putting + to one of the terminals should make the motor work....
Cheers
Last edited by tronlc; 03 March 2007 at 01:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post